User manual

Operating Instructions
41
Additional Rinse +Á (RINSE+)
The washing machine is set for very economical water consumption.
However, for persons who suffer from allergies to detergents, it can be
helpful to rinse with extra water.
3
If this function is set, an additional rinse cycle is carried out for the
t} (COTTONS/LINEN, EASY-CARES), <(EASY IRON) and Ã
(DELICATES) programmes.
When the appliance is supplied from the factory, the additional rinse
function is not set.
Setting the additional rinse function:
0 1. Turn the programme selector to L (SHORT SPIN).
2. Press the e
(SENSITIVE) button for at least 5 seconds. After the button
has been pressed for 5 seconds, +Á (RINSE
+) will flash in the pro-
gramme progress display for 5 seconds.
3. While +Á (RINSE
+) is flashing, release the e (SENSITIVE) button.
Once the flashing has stopped, the additional rinse has been set. It will
remain set until it is cancelled again. When the additional rinse has
been set, the +Á (RINSE
+) indicator in the programme progress dis-
play is illuminated before the programme starts and during the addi-
tional rinse.
4. If you wish to check whether the additional rinse is set:
– Turn the programme selector to L (SHORT SPIN).
– Press the e
(SENSITIVE) button briefly.
If +Á (RINSE
+) flashes in the programme progress display the addi-
tional rinse has been set.
Cancelling the additional rinse:
0 1. Turn the programme selector to L (SHORT SPIN).
2. Press the SENSITIVE button for at least 5 seconds.
Immediately the button is pressed +Á (RINSE
+) will flash in the pro-
gramme progress display. After 5 seconds +Á (RINSE
+) will stop
flashing and remain constantly illuminated for a further 5 seconds.
3. While +Á (RINSE
+) is constantly illuminated, release the e
(SENSITIVE) button. Once +Á (RINSE+) is no longer illuminated the
additional rinse has been cancelled.
3
An additional rinse cycle increases water consumption and the pro-
gramme duration.