User manual

Operating Instructions
44
Programme Protection
To safeguard a programme setting against unwanted changes (e. g.
programme selector turned, option buttons pressed etc.), you can set
the programme protection. This prevents your washing being damaged.
3
It is possible to set or cancel the programme protection at any time
during a programme.
Selecting programme protection:
0 1. Select the desired wash programme settings.
2. Press the O/s (START/PAUSE) button to start the programme.
3. Press and hold down the k (PRE WASH) and e
(SENSITIVE) buttons
simultaneously for 5 seconds. The programme progress indicator will
flash for 5 seconds; programme protection has been set.
3
As long as the programme protection is set, you cannot make any other
settings. The door cannot be opened using the
K
/W (DOOR/LIGHT)
button. Even after the wash cycle has finished you will need to cancel
the programme protection before you can open the door.
If an attempt is made to change the selected settings during the wash
cycle by activating a button, the programme progress display will flash
for 5 seconds.
If you attempt to change the selected setting by turning the pro-
gramme selector, the programme progress display will flash until the
original setting of the programme selector is restored. The wash cycle is
not influenced in either case.
3
The programme selector must be in its original position in order to can-
cel the programme protection.
Cancelling programme protection:
0 Press and hold down the k (PRE WASH) and e (SENSITIVE) buttons
simultaneously for 5 seconds. The programme progress indicator flashes
for 5 seconds and then remains illuminated constantly for 5 seconds.
Programme protection has been cancelled.