User manual

Instructions for use
43
Variomatic Loose Spin
A spin function that can be set as an integrated part of the final spin.
The washing clings less to the drum wall and can be removed more eas-
ily. May be selected with COTTONS/LINEN, EASY-CARES (WITTE/BONTE
WAS, KREUKHERST.).
Setting loose spin:
0 1. Turn the programme selector to SHORT SPIN (KORT CENTRIFUGEREN).
2. Press the STAIN (VLEKKEN) button for at least 5 seconds.
After the button has been kept pressed for 5 seconds, END (EINDE)
flashes on the programme progress display for 5 seconds.
3. Release the STAIN (VLEKKEN) button while END (EINDE) is flashing.
Once it has stopped flashing, the loose spin function has been set. It
will remain set until it is cancelled again.
4. If you wish to check whether the loose spin function is set:
– Turn the programme selector to SHORT SPIN (KORT CENTRIFUGEREN).
– Press the STAIN (VLEKKEN) button briefly.
If END (EINDE) flashes in the programme progress display, the loose spin
function has been set.
Cancelling loose spin:
0 1. Turn the programme selector to SHORT SPIN (KORT CENTRIFUGEREN).
2. Press the STAIN (VLEKKEN) button for at least 5 seconds.
END (EINDE) flashes in the programme progress display as soon as the
button is pressed. After 5 seconds END (EINDE) will stop flashing and
remain constantly illuminated for 5 seconds.
3. While END (EINDE) is constantly illuminated, release the STAIN
(VLEKKEN) button. Once END (EINDE) is no longer illuminated, the
loose spin function has been cancelled.