LAVAMAT LAVALOGIC 1620 Washing Machine User information Downloaded From WashingMachine-Manual.
Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appliance. 1 3 2 The following symbols are used in the text: Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance. Useful tips and hints Environmental information Downloaded From WashingMachine-Manual.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switching on the appliance for the first time – setting the language 7 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control panel with display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Programme protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Child safety device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remedying small malfunctions yourself . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. • If the appliance is delivered in the winter months when there are minus temperatures: store the washing machine at room temperature for 24 hours before using for the first time. Correct use • The washing machine is only designed for the washing of normal domestic laundry at home. • Additions or modifications to the washing machine are not permitted.
General safety • Repairs to the washing machine may only be carried out by qualified/ authorised service engineers. • Never use the appliance when the electrical cable is damaged or the control panel, worktop or plinth area are damaged to such an extent that the inside of the appliance is openly accessible. • Switch off the washing machine prior to cleaning it and carrying out maintenance.
Switching on the appliance for the first time – setting the language When switching on the appliance for the first time you should be sure to set the language in which you want the indicators in the display to appear. 1. Press the control knob. The appliance is now switched on. The languages that can be chosen will appear in the display. In the factory the language is preset to German. Important: If the display is not showing any languages, the appliance has been switched on before.
Description of the appliance Control panel with display Drawer for detergent and conditioner Door Rating plate (behind door) Three screw feet (height adjustable); rear left: Automatic foot Drain pump cover Control panel with display LINEN/EASY-C. 60°C 1600 RPM START 60° Buttons 1600 OPTIONS 10:17-12:16 î LINEN/EASY-C.
Main control features Control knob Switching the appliance on and off Press the control knob to switch the appliance on and off. Highlighting You can highlight the entries on the right of the display by turning the control knob. WOOLLENS 40°C 1200 RPM START 40° 1200 OPTIONS 10:17-10:54 î LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES WOOLLENS ) Cancelling settings If you would like to cancel settings that have been made by mistake, switch the appliance off and on again using the control knob.
Programme overview Options Spin speed WOOLLENS 40, 30, COLD (Handwash) RINSE HOLD 3,5kg 1200/1000/ 800/600/400 DELICATES 40, 30, 20 1600/1400 7kg1) PRE WASH COTTONS 95 STAIN 7kg1) SENSITIVE ENERGY SAVING4) DELAY START 7kg1) or 3,5kg VERY QUICK LINEN/EASY-CARES 60, 50, 40, 30, 20 QUICK Programme max.
Use/Features General programme for coloured and easy-care items made of cotton/linen as well as for easy-care mixed fibres and synthetics. The wash programme is adjusted according to the different fabric types and load sizes. If loading only with easy-care washing, do not load more than 3,5kg. Energy-saving and water-saving programme which washes at 60°C for lightly to normally soiled whites/coloureds made of cotton/linen. Programme for normally to heavily soiled whites made of cotton/linen.
Options Spin speed SHORT SPIN • SPIN 7kg • • • STARCH 7kg • • • • Downloaded From WashingMachine-Manual.com Manuals RINSE HOLD 1200/1000/ 800/600/400 1600/1400 PRE WASH STAIN 3,5kg DRAIN 12 SENSITIVE DELAY START VERY QUICK QUICK Programme max.
Use/Features Drain and short spin after a rinse hold, or separate short spin of handwashed delicates, woollens, silk. Drain and spin, e.g. after a rinse hold, or separate spin for hand-washed cottons/ linens and easy-cares. Separate starching, conditioning, stiffening, treating of damp washing. Caresymbols1) IKN QLH JMO JMO IKN Draining of the water after a rinse hold. 1) The figures in the care symbols indicate the maximum temperatures. Downloaded From WashingMachine-Manual.
Before the first wash Setting the time So that the current time and the end of the programme are correctly displayed, please check the display and set the current time, if necessary. (See “Setting extra options: Timer”.) Carrying out a wash programme prior to first use Before doing your first wash, run a washing cycle without any washing in the machine (programme COTTONS 95°, option TIME SAVING/VERY QUICK, use approx. 1/4 measuring cup of washing powder).
Running a wash cycle Switching on the appliance 3 Press the control knob. The appliance is now switched on. Before switching the appliance on, make sure that the drum is empty. If you do not, the washing will subsequently not be registered properly by the load sensor. Setting a programme 5. Highlight the desired programme, e.g. DELICATES. DELICATES 40°C 1200 RPM 11:25-12:36 î START 40° 1200 OPTIONS LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS Changing the temperature 6.
3 RINSE HOLD means: the washing is left to soak in the last rinse water and is not spun. If required, set options. Selecting options You can select different options on top of the programme that has been selected. Only options that can be combined with the programme that has already been selected will be offered. TIME SAVING DELAY START SENSITIVE STAIN PRE WASH Shortened wash programme for more lightly soiled washing. The start of a programme can be delayed in steps of 30 minutes to a max. of 20 hours.
DELAY START 1. Press the OPTIONS key. 2. Use the control knob to highlight DELAY START. 3. Press the SELECT key. 4. Use the control knob to DELICATES 30°C 1000 RPM 11:25-14:06 highlight the time at which è the programme is to end. END OF PROGRAMME SELECT 5. Press the SELECT key. The 14:06 H:MIN ( BACK programme end time will change in the information panel. 6. Press the START key. Cancelling DELAY START: Press the START key again. The wash programme will start immediately. SENSITIVE/STAIN/PRE WASH 1.
Opening the door/Loading the washing 1. To open the door: carefully pull the handle on the door. 2. Unfold the washing and load it loosely into the machine. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal. 3. Push the door firmly shut.
Adding detergent/conditioner Important: Only use detergents/conditioners that are suitable for use in domestic washing machines. Add detergent/conditioner in accordance with the detergent/conditioner manufacturer’s instructions. Observe instructions on the packaging. The amount of detergent used depends on: – the washing’s degree of soiling, – the load size – the hardness of the tap water. Water softener should be used from water hardness range 2 (=medium).
Starting a programme 1. Check that the water tap is open. 2. Press the START key. The wash cycle is started. DELICATES 30°C 1000 RPM 11:25-12:36 î START 30° 1000 OPTIONS LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS Programme progress While the programme is DELICATES 30°C 1000 RPM 11:25-12:36 running, the display shows § PAUSE among other things: MAIN WASH – each stage of the pro###############=========] gramme as it progresses, 1000 MOISTURE 50 % e.g.
Washing cycle complete/Removing the washing At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the § symbol appears, the door can be opened. 1. Open the door using the handle. 2. Remove the washing. 3. Switch off the appliance. If Rinse Hold has been selected: 1. Press the START key. DELICATES 30°C RINSE HOLD 11:28-11:28 § START RINSE HOLD ###################### RINSE H. The display automatically changes to the first programme page.
Setting extra options Independent of any programme you can set different basic settings. These basic settings will permanently remain active until they are deselected again. MEMORY 1, 2, 3, 4 RINSE+ GENTLE SPIN LANGUAGE TIMER VOLUME Frequently used programme settings can be stored. The stored programme setting can then be selected like a normal programme. There are a total of four memory positions available.
4. Highlight the SENSITIVE option. 5. Press the SELECT key. The symbol will appear in the display. LINEN/EASY-C. 40°C 1200 RPM 10:17-12:16 ç START TIME SAVING DELAY START SENSITIVE) STAIN PRE WASH SELECT BACK EXTRAS 6. Press the EXTRAS key. MEMORY is highlighted: 7. Press the SELECT key. EXTRAS ì SELECT MEMORY( RINSE+ GENTLE SPIN. LANGUAGE BACK If MEMORY 1 is highlighted: 8. Press the SAVE key. The programme setting is stored as M1: LINEN/EASY-C. 9. Then press the BACK key 3 times.
RINSE+, GENTLE SPIN 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight the desired Extra, e.g. RINSE+. 4. Press the SELECT key. The symbol appears in the display. 5. Press the BACK key twice. EXTRAS ì SELECT MEMORY RINSE +) GENTLE SPIN LANGUAGE BACK LANGUAGE 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight LANGUAGE. 4. Press the SELECT key. 5. Use the control knob to highlight the desired language, e.g. ENGLISH. 6.
VOLUME 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight VOLUME. 4. Press the SELECT key. 5. Use the control knob to highlight OFF, NORMAL or LOUD. 6. Press the SELECT key. 7. Press the BACK key 3 times. EXTRAS VOLUME é § SELECT BACK OFF§§§ NORMAL!) LOUD§§§ Programme protection In order to protect the selected settings of a programme that is running from unintentional alterations, the buttons can be locked. Setting programme protection: 1. Start the programme. 2.
Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise direction as far as it will go. 1 Warning! The knob must not be depressed after being set, otherwise the child safety device is not activated. The knob must stand out as shown in the illustration. Deactivating the child safety device: Turn the knob in an anti-clockwise direction as far as it will go.
Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1. Remove the detergent dispenser drawer by pulling it firmly. 2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4. Put the conditioner insert in as far as it will go, so that it is firmly in place. 5. Clean all parts of the washing machine, especially the nozzles in the top of the washing-in chamber, with a brush. 6.
What to do if... Remedying small malfunctions yourself If one of the following fault messages is shown in the display during operation: – ATTENTION (E41)/PLEASE CLOSE THE DOOR – ATTENTION ERROR CODE (E11)/PLEASE OPEN THE TAP – ATTENTION ERROR CODE (E21)/PLEASE CHECK THE WATER DRAINAGE please refer to the following table. After you have rectified the error, press the START key. If ATTENTION/PLEASE CALL YOUR LOCAL SERVICE FORCE together with an error code (e.g. E..
Problem Possible cause The drain pump runs constantly, even when the machine is The Aqua Control anti-flood switched off. system has been activated. ATTENTION (EF3)/ PLEASE CALL YOUR LOCAL SERVICE FORCE appears in the display. The washing machine vibrates when operating or is not stable. Washing has not been spun. Remedy Close the water tap, remove the mains plug from the socket and inform your local Service Force Centre. The transit packaging has not Removing the transit packbeen removed. aging.
Problem The display goes out while a wash cycle is running. Possible cause Power cut. For safety reasons, the door will remain locked for approx. 4 minutes. The background illumination of the display The washing machine is in has gone out even stand-by mode. though the appliance is switched on. Water is not entering the appliance. ATTENTION ERROR CODE (E11)/ PLEASE OPEN THE WATER TAP appears in the display. The washing has not been spun thoroughly and water remains visible in the drum.
If the wash result is not satisfactory The washing is grey and there are limescale deposits in the drum • Too little detergent was used. • An incorrect detergent was used. • Individual stains were not pre-treated. • The programme or temperature was not set properly. There are grey stains on the washing • Items that were soiled with ointments, fats or oils were washed using too little detergent. • The wash temperature used was too low.
Carrying out an emergency drain 1 Warning! Prior to carrying out an emergency drain, switch off the washing machine and remove the power plug from the power point. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain! 1. Open the plinth flap and remove it. 2. Remove the emergency drain hose. 3. Place a shallow container underneath it.
Drain pump 1 The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that there are no foreign bodies present in the pockets or in between the items to be washed. Paper clips, nails, etc.
Disposal 2 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. Old appliance W 1 The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x Width x Depth 850 x 598 x 640 mm Depth when door is open 1017 mm Height adjustment approx. +10/-5mm Load (depending on programme) Max. 7kg Area of use Domestic Drum spin speed see programme overview Water pressure 0.
Installation and connection instructions 1 Safety information concerning installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sustained while it was being transported. Do not under any circumstances connect an appliance that is damaged to the mains. In the event of damage to the appliance contact your supplier. • Be sure to remove all the components of the transport lock before using the appliance for the first time.
Installing the appliance Transporting the appliance 1 Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when lifting the appliance. • Do not lay the washing machine on its front nor on its right side (as seen from the front). Electrical components may get wet. • Never transport the appliance without using the transport lock. Only remove the transport lock when the appliance is in its place of installation.
2. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance. 3. With a suitable spanner unscrew and remove the central rear bolt A. Slide out the relevant plastic spacer. 4. Unscrew and remove the two large rear bolts B and the six smaller bolts C. Downloaded From WashingMachine-Manual.
5. Remove the bracket D. 6. Refit the six smaller bolts C. 7. Open the porthole and remove the polystyrene block fitted with the adhesive tape on the door seal. 8. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Important! All the different plug caps are supplied with the appliance in the plastic bag containing the instruction booklet. Downloaded From WashingMachine-Manual.
Connect the water inlet hose as described under the paragraph “Water inlet”. Where to install Important! The washing machine must not be operated in a room where there is a danger of frost. There is a risk of frost damage or adverse effect on the perfomance of the machine. Frost damage is not covered under the warranty. • The surface on which the appliance is to be installed must be firm and level. Do not install the appliance on carpeted floors or soft floor coverings.
Electrical Connection 1 1 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The appliance is supplied with a 13 amp plug fitted.
Permanent Connection 1 In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations. The switch must not break the yellow and green earth cable at any point. This appliance complies with the requirements laid out in the EEC Directive 76/899.
Connecting to the water supply Permitted water pressure The water pressure must be at least 0.5bar (=5N/cm2 =0.05MPa) and may be a maximum of 10bar (=100N/cm2 =1MPa). – If more than 10bar: Connect a pressure reduction valve. – If less than 0.5bar: Disconnect the appliance end of the inlet hose from the solenoid inlet valve and remove the flow meter. (In addition remove the filter using pointed pliers and take out the rubber gasket behind it.) Re-insert the filter.
4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. Installation should comply with local water authority and building regulations’ requirements. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance. If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (16.
Water Drainage The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe. Important! It is essential to lay the drainage hose without kinks. When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.
Pumping heights of over 1 metre The washing machine’s drain pump is able to pump water to a height of 1metre, calculated from the surface on which the appliance is installed. Important! If pumping height is over 1 metre malfunctions and damage to the appliance may arise. For pumping heights over 1metre a conversion kit can be obtained. Please contact Service Force Centre. Downloaded From WashingMachine-Manual.
Guarantee/Customer Service European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
p t b Lietuva +370 5 2780609 Ozo 10A, LT 08200 Vilnius Luxembourg +352 42 431 301 Rue de Bitbourg, 7, L-1273 Hamm Magyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet királyné útja 87 Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG Alphen aan den Rijn Norge +47 81 5 30 222 Risløkkvn. 2 , 0508 Oslo Österreich +43 18 66 400 Herziggasse 9, 1230 Wien Polska +48 22 43 47 300 ul.
Downloaded From WashingMachine-Manual.
Downloaded From WashingMachine-Manual.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
www.electrolux.com www.aeg-electrolux.co.uk 132 973 340-01-120307-01 Subject to change without notice Downloaded From WashingMachine-Manual.
