Please deaf and follow the instructions in this booklet Separate instructions on installation and connection are supplied with the machine. important To avoid damage during transit we have fitted transit bars to the machine. Please remove these before Installing and connecting the machine. You will find details how to do this on the red sticker on the washing machine and in the installation instructions.
Your LAVA MAT Figure 1/A Programmer selector Figure 1/B Temperature selector Figure 1/C Burton for easy-care fabrics and wool Figure 1/0 Button for small loads Figure 1/E Door control light (yellow)} Figure 1/F Antedate dispenser with double sided programmer chart® memorable . Figure 1/G Door with handier Figure $/H Drain pump with pus-out emergency drain tube to the left.
Sorting the laundry Sorting the laundry | Check the manufacturer's instructions or the care label inside sate garment (80 the international Textile Care La balling Code in the programmer chart). The laundry should be sorted into: Cottons and Hinayana {whits snd coloreds) Ens-care fabrics Dedicate synthetics Woolens DO’s and DON'Ts. & Do not mix whites and coloraturas as the whites will become Grey. W Naw terns tend 10 lose some of their color when washed for the first time.
Washing powder, conditioner and starch W {n an automatic washing machine you need to use a low lather washing powder. We recommend Ariel automatic which has hen specially formulated for automatics. B To soft rinse or starch laundry ba sure 1o use liquid fabric conditioner {we recommend Leno) or starch.
Explanation of controls For normally dolled laundry use a programmer without & per-wash {selector programmer number 2 or 3). For mots heavily soiled laundry use a pro-wash and & main wash (selector programmer number 1) with the exception of wool. o select 8 wash programmer set the programmer selector (figure 1/A) to the required programmer number, the temperature selector {figure 1/B} to the required temperature and press any selector button(s) required (figure 1/cip).
How to switch the machine on and off How to start the making 1. Tum the programmer selector (only in the pushed In state) clockwise to the required programmer, select the required temperature and press any buttons as required (ses programmer chart). PULL OUT the programmer selector (to switch on the machine). A white band will be visible 1o indicate the machine is switched on. Tha door control fight comes on as soon as the door is locked.
Main programmed international Textile Care | Fabrics Type of foundry Programmed | Load La belling size Code \95’ White cotton and Bed and table linen, towels, | Hot wash uploSkg')i fine articles without | underwear, white or . special finishes colorfast i Bed and table fine, Hot wash Upton )l towels, underwear {shorter ! without stains main wash) | \95' ‘White cation and Bed and table linen, lightly uptoSkg**}: fine articles without | towels, underwear soiled 4 special finishes without stains v \so/ Cotton,
programmer Selection Programmer Cycle Small | Note yammer Temporarily Scorbutic Load eclogue Selector orz oy Pr-wash main wash m 1 with per-wash 4 rinses spinning without per-wash T3 [ Pro-wash shore main o ™ size for Wy wash -4 tinges 0 normal spinning soiled laundry 5 kg or2 E P re-wagh -~ main wash — @ A Heavily soiled laundry 4 rinses spinning 35kg or3 Pr-wash main wash b 4 tinges spinning @ or3 Pr-wash rain wash w 4 rinses — spinning m 4 Shortened main wash ~ o 4 rinses spinning :gr-nses @ ! i left in
Programmer Cycle Massif Notes Gloat Ringing spinning o Rinsing with o *} Rinse hold tines hold") The laundry is left in the last rinse water. Spinning — for foundry washed and rinsed by hand Pr-wash (soaking) — fills to high water level ~ laundry is loft in the wash solution. Process as tor rinse hold*} Pump out — short spin — (Otter 2 rinse hold programmer or for laundry washed and rinsed by hand) Pump out, e. . following 2 programmer with rinse hold”) Before opening the door, release button .
How to look after your LAVA MAT Protecting ihe machine against frost Any damage cus 1o frost is not covered by warranty. i the machine is situated in a room which might be affected by frost, any water . must be removed rom the drain pump (see emergency drain this page; as well as from the water infer hoses (disconnect the initiate those from the water tap and drain}. Care and maintenance The detergent dispenser requires cleaning from time to time ta time.
If you think your machine is not working properly The door cannot be opened immediately the programmer Is interrupted B The machine has a safety lock which wiki only be released after 1 to 2 minutes. Water is leaking from underneath the machine W Check the water inlet hose connections fo the tap and to the machine, Check the drain hose connection to the machine. 8 Hack the water ‘net and outlet hoses. for leaks. W Check that the drain pump cover is closed properly (see “Cleaning the drain pump®).
Service Should you be unable to locale the cause of the problem in spite of the check list “it you think your machine is not working property, then please contact your AEG Service Department. it you require to have your machine serviced you will assist the Service Department by Gusting the F and £ numbers which you will find on the rating plate in the area of the jading door.