Please read and follow the instructions in this booklet — Keep instructions in a safe place The OKO development loom AEG . Saves detergent The Eco valve closes off the wash tub from the drainage system and ail the detergent is available for the washing cycle wit how nosing any. it uses al least 20 % less detergent saving you money and protecting he environment. Vasts water A new rinse-spin development reduces sussing in the confinement programmed during the intermediate spinning cycles.
N / // Opening the loading door before the machine connected (fig. 7). 1 Turk rotary control for emergency drain {A} & quarter turn anti-clockwise 1o the stop position Using a coin turn disc {B) anticlockwise unit the goading door springs open. Turn rotary control for emergency drain (A} in clockwise direction, 8 Opening the loading door — after the making has been connected fo the power supply (tig. 8).
Your LAVA MAT Fig. 1A Wash programmer selector Fig. 1B Programmer progress indicator Fig. 1C Confetti button with start facility and indicator light #ig. 110 Door release button Fig. 1IE Button for snail loads Fig. 1F AROMATIC-pution Fig. G Burton for automatic per-wash Fig. UH Burton for energy saving programmed Fig. 1 Bullion for quick wash Fig. 11K Bullhorns for sower spin speeds Fig. 1L Detergent dispenser (with double sided programmer chart*) Fig.
Sorting the laundry Sorting the laundry Check the manufacturer’s instructions of the care label inside pate garment {seo the [international Textile Care La belling Code in the programmer chart and on the programmer selector. The laundry should be sorted into: Cottons and fines (whites and coloreds) Easy-care fabrics Dedicate synthetics Woolens Special notes W Do ot mix whites and coloreds. as the whites will become Grey.
Load Sizes You will find details as 10 how much laundry you can wash in your machine 1n 1he programmer chart bul you may find the hollowing general information useful: W When washing cottons and linens fill the drum with dry Laundry leaving a space of a hand's breadth between laundry and {he top of the drum. ™A ditherer {2V gallon) bucket will take approximately 2.5 Kg of tightly packed dry laundry {cottons and fines) W Distribute the laundry in the drum as lonely as possessive.
Washing detergent, conditioner and starch Before selecting a programmer, pour washing powder and fabric conditioner into the relevant compartment of the dispenser Yo do this pull open the dispenser drawer. You will find 3 compartments (fig. 35 Compartment {' ) washing powder tight) for the rewash Compartment washing powder recent} for the main wash Compartment \§ squid fabric conditioner [0 or starch Do not il fabric conditioner above “MAX” indicator level as otherwise the liquid may drain immediately.
Explanation of controls Selector buttons Onion button with start facility and indicator light {fig. 1C) (fl Door release button {fig. 110} The door is locked for the duration of the programmer. It can only be opened after the programmer has finished. @ Buttons tor small loads {fig. 1/E) Press this button in addition 10 a selected programmer it you want 1o wash Smaller roads.
Explanation of controls Buttons for lower 650 spin speeds tho. 1K) 10004 Cottons and linens — press one of these buttons if you wish to reduce the spin speed trim 1400 rpm to a lower one. i you do not select one of these buttons the laundry wife be spun at 1400 rpm. it laundry is to be dried in a fumble dryer use the 1400 rpm spin speed for maximum water extraction.
ash mp. pro X. Buttons Programmer cycle Additional oplions***) Quick advance through the different programmer stages.
Main programmed Note: Please turn to page 7 for information 6n what 1o do before starting & wash programmer. ) Load size for B Lightly and normally soiled laundry 5 Kg B Heavily spited laundry 3.5 Kg During the wash the machine is stationary tor 25 minuses 50 do not move an the programmer control.
dash Programmer | Buttons temperature Programmer cycle Additional options***) Pr-wash (soaking) — kills to high water love — laundry is deft in the wash solution To pump oot select H Long spin Pump out — pantie CHARISMATIC spin Pump out, e.g. following a programmer with rinse hold*) To use the separate sold rinsing o starching facility: 1) Advance machine to the beginning of the soft rinsing stage \ @8] using settling X on the programmer selector 2} Stop machine al this stage by pressing button continue by
Additional rinse Your Laval has been designed 1o save water, It features thee rinses which give optimum results, but i an extra rinse cycle is required as standard (for example it someones in your household has very sensitive or problem skin) this can be activated. For instructions how 10 do this please phone AEG Home Economics Department 0753 872115, The wale consumption of the machine is thus increased by 20 %.
Care and maintenance The detergent dispenser requires cleaning farm time 1o time. To do this remove the drawer completely by purling it out. Clean the dispenser. Tot it into the guide rails and push fo close. Before replacing the detergent dispenser. clean the root of the aperture aver the detergent compartments with a brush, Fromm time to time check and clean any residue from the rubber gasket! in the toadying door. The drum ot your machine is made of stainless steel and cannot rust.
if you think your machine is not working properly Spin cycle is delayed Thus is normal if the load is unbalanced. In this case the detection out-of-balance control system has been activated and the drum wilt turn in both directions loosening the clothes to distribute them more evenly in the drum. This can happen several times unlit he clothes are distributed wel enough for the machine 1o commence the spin cycle.
Service Shouts you be unable to locate the cause of the problem in spite of the check list “H you think your machine is not working property, then please contact your AEG Service Department. # you require 1o have your making serviced you wiki assist the Service Department by quoting the F and € numbers which you will find on the rating plate behind the loading door. These numbers enable the service Department 1o order any parts to complete the repair on the first call, it at il possible.
Technical Data Dimensions: With worktop (where fitted). Height 850cm Widen 600 cm Depth &0.0cm Without worktop Height 829 cm With 595 em Depth 57.0cm Capacity: Depicting on the programmer Energy consumption for 95°C program ma {or cold il 1.8 KWh Water consumption; 68 fires With additional rinse: 90 fires Electrical connection: Please see information on the rating plate af the appliance.