User manual

16
Use
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out
to prevent the fabrics from creasing. At the end of the programme,
0 and RINSE
HOLD symbol appear on the display, DOOR symbol (door locked) remains lit, the pilot
light of button
7 goes off and the door is blocked to indicate that the water must
be emptied out.
NIGHT CYCLE: by selecting this option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed,
this washing cycle is very noiseless and it can be selected at night or in times with a
more economical power rate
. In some programmes the rinses will be performed
with more water. At the end of the programme,
0 and RINSE HOLD symbol
appear on the display, the DOOR symbol remains lit, the pilot light of button
7
goes off and the door is blocked to indicate that the water must be emptied out.
To empty out the water, please read chapter «At the end of the
programme».
Select the desired option by means of button 4 and confirm your
choice by means of button 5
Depending on the programme, different functions can be combined.
Attention: Not all the options are compatible among themselves. The symbols of
the incompatible options disappear.
Anyway, if an option, which is not compatible with the set washing programme
or any other option, is selected, the Err message is displayed for few seconds
and the yellow pilot of button
7 light starts blinking.
You must select the options after you have selected the programme but before
pressing the button
7. Press the button 4: all the option symbols appear on the
display.
To scroll all the available options, press the button
4. The corresponding symbol
appears on the display and starts blinking.
Press the button
5 to activate and confirm your choice. A black dash appears under the
selected symbol to indicate that this option has been set. Press the same button to
deactivate the option.
After selecting the options, wait about few seconds untill the display gets back to the
default status. The selected options appear on the display.
For the compatibility between this option and washing programmes consult the
chapter
«Washing programmes».
PREWASH option
Select this option if you wish your laundry to be prewashed at 30°C before the
main wash.
132966711.qxd 05/03/2008 14.50 Pagina 16
Downloaded From WashingMachine-Manual.com Manuals