Operation Manual

5. Take out fine strainer.

6. Remove fluff from fine strainer. It is

best to use a moist hand for this pur-

pose.

Clean the full filter area

The strainer area does not have to be

cleaned after every drying cycle, but

should be checked regularly and

cleaned of fluff if necessary.

7. To do this, grip the top of the large

mesh filter and pull it forwards until it

comes loose from the 2 brackets.

8. Remove fluff from the full filter area.

It is best to use a vacuum cleaner for

this purpose.

9. Push both journals of the large mesh

filter into the brackets on the loading

door until they snap into place.

10. Re-insert fine strainer.

11. Push against the large mesh filter until

it locks into the interlock.

If the fine strainer is not fitted, the large

mesh filter will not snap into place and the

loading door cannot be closed.

Cleaning the door seal

Clean the door seal with a moist cloth immediately after the drying cycle is completed.

Emptying the water reservoir

Empty the water reservoir after each drying cycle.

If the water reservoir is full, an active programme will break off automatically and the

empty container

symbol on the display will light up. To continue the programme, the

water reservoir must first be empty.

Care and cleaning