User manual

Instructions for use
21
Changing the spin speed/Selecting the rinse
hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
0 Continue pressing the spin speed/RINSE HOLD
(GEEN CENTR., SANS ESSOR.) button until the indi-
cator for the desired spin speed is illuminated.
3
If you do not change the spin speed, the final spin
will be adjusted automatically depending on the
type of wash cycle:
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Continue pressing the spin speed/RINSE HOLD (GEEN CENTR., SANS ES-
SOR.) button until the RINSE HOLD (GEEN CENTR., SANS ESSOR.) indi-
cator is illuminated.
3
If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is selected, the washing
will remain in the final rinse water and will not be spun.
The washing will not be spun throughout the entire wash cycle. As a re-
sult the cycle is a very quiet one. RINSE HOLD (GEEN CENTR., SANS ES-
SOR.) is therefore especially suitable for washing at night.
Note: The laundry remains lying in the water until you drain or spin
(see section “Ending a wash cycle”). After 18 hours however, it is auto-
matically drained and pumped.
– COTTONS/LINEN
(WITTE/BONTE WAS, BLANC/COULEURS)
1550 revolutions
per minute
– EASY-CARES/EASY IRON
(KREUKHERSTELLEND, DEFROISSABLE/
STRIJKVRIJ, SANS REPASSAGE)
900 revolutions
per minute
– DELICATES
(FIJNE WAS, LINGE DELICAT)
700 revolutions
per minute
– WOOLLENS
(WOL, LAINE)/P (Handwash)
900 revolutions
per minute