LAVAMAT SOUPLESSE 10 Lave-linge Informations pour les utilisateurs
Chère cliente, cher client, veuillez lire avec attention ces informations pour l'utilisateur. Tenez surtout compte de la section «Sécurité» des premières pages. Conservez ces informations pour usage ultérieur. Transmettez-les à un éventuel possesseur suivant de la machine. 1 Le triangle d'avertissement et/ou des mots de signalisation (Avertissement!, Prudence!, Attention!) soulignent des consignes qui sont importantes pour votre sécurité ou pour le bon fonctionnement de l'appareil.
Sommaire Mode d'emploi ............................................. 6 Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Elimination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Conseils de protection de l'environnement . . . . . . . . . . . . . . . . . . . . . . . . 9 Description de l'appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tableau des programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lavage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Séparé Assouplissant/Amidonnage/Imperméabilisation . . . . . . . . . . . . . . Rinçage séparé . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Essorage séparé . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Raccordement électrique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Arrivée d'eau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pression d'eau admissible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alimentation en eau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Evacuation de l'eau . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mode d'emploi Mode d'emploi 1 Sécurité La sécurité des appareils électroménagers AEG est conforme aux règles reconnues de la technique et à la législation portant sur la sécurité des appareils. Toutefois, en qualité de constructeur, nous nous sentons obligé de vous familiariser avec les consignes de sécurité suivantes. Avant la première mise en service • Respectez les «informations d'installation et de raccordement» données plus loin dans ces informations pour l'utilisateur.
Mode d'emploi Sécurité des enfants • Les éléments constituant l'emballage (les films en plastique, les morceaux de polystyrène p. ex.) peuvent présenter un danger pour les enfants. Risque d'asphyxie! Garder les éléments d'emballage hors de la portée des enfants. • Les enfants ne sont souvent pas en mesure de reconnaître les risques émanant des appareils ménagers.
Mode d'emploi • Laissez refroidir l'eau de lessive avant d'effectuer une vidange de secours ou de nettoyer la pompe à lessive. • Les petits animaux domestiques peuvent ronger les câbles électriques et les tuyaux d'eau. Risque d'électrocution et danger d'inondation ! Maintenir les petits animaux domestiques à l'écart de la machine à laver. 2 Elimination Eliminer le matériel d'emballage! Eliminez le matériel d'emballage de votre machine à laver de manière correcte.
Mode d'emploi 2 Conseils de protection de l'environnement • En cas de linge moyennement sale, vous pouvez renoncer au prélavage. Vous économisez ainsi des produits de lavage, de l'eau et du temps (et vous ménagez l'environnement!). • La machine à laver travaille de manière particulièrement économique lorsque vous utilisez entièrement les quantités de remplissage indiquées. • Pour les petites quantités, ne dosez que la moitié ou les deux-tiers de la quantité recommandée de produit de lavage.
Mode d'emploi Description de l'appareil Vue frontale Bac-tiroir Produits de lavage et Additifs Bandeau de commande Plaque signalétique (derrière porte de remplissage) Porte de remplissage Clapet avant Pompe de vidange Pieds de réglage (réglables en hauteur) Bac-tiroir pour Produit de lavage/Additif Détachant Produit de lavage principal (en poudre) et éventuellement adoucissant 10 Produit de prélévage ou Adoucissant Additif liquide (Assouplissant, imprégnation, amidon)
Mode d'emploi Bandeau de commande Touche Nombre de tours essorage/ SANS ESSORAGE Programmateur Touche MARCHE/PAUSE Multiafficheur Touches de programmes additionnels Afficheur déroulement des programmes Programmateur Le programmateur permet de sélectionner le type de lavage (p. ex. Niveau d'eau, mouvement du tambour, nombre de rinçages, vitesse d'essorage) selon le type de lavage ainsi que la température de la lessive. ARRET • La seule position à débrancher la machine à laver.
Mode d'emploi DEFROISSABLE Lavage principal pour textiles défroissables (Synthétiques) de 40 °C à 60 °C. Position SANS REPASSAGE: Lavage à 40 °C pour textiles synthétiques qui grâce à ce programme ne devront être repassés que légèrement ou pas du tout. LINGE DELICAT Lavage principal pour linge délicat à 30 °C ou 40 °C.
Mode d'emploi Touches de programmes additionnels Les touches de programmes additionnels servent à adapter le programme de lavage au degré de salissure du linge. Pour du linge normalement sale, les programmes additionnels ne sont pas nécessaires. Selon le programme, différentes fonctions peuvent être combinées. PRELAV. Prélavage à chaud avant le lavage principal qui suit automatiquement; avec essorage intermédiaire pour linge BLANC/ COULEURS et DEFROISSABLE, sans essorage intermédiaire pour LINGE DELICAT.
Mode d'emploi Valeurs de consommation Les valeurs pour les programmes sélectionnés du tableau suivant ont été déterminées dans des conditions normalisées. Pour le fonctionnement en ménage, elles constituent cependant une indication utile.
Mode d'emploi Avant la première lessive 0 1. Tirez légèrement le bac-tiroir pour produits de lavage. 2. Versez environ 1 litre d'eau dans la machine à laver à travers le bac-tiroir pour produits de lavage. Lors du démarrage du prochain programme, le récipient à lessive sera ainsi fermé et l'écluse ECO pourra fonctionner correctement. 3. Effectuez un lavage sans linge (BLANC 95 °C, avec une demi-quantité de produit de lavage).
Mode d'emploi • Mélangez les grandes et les petites pièces de linge! Vous améliorerez ainsi l'effet de lavage et le linge sera mieux réparti lors de l'essorage. • Défroissez le linge avant de l'introduire dans la machine à laver. • Introduisez le linge déplié dans le tambour. • Respectez les symboles d’entretien «laver séparément» et «laver séparément à plusieurs reprises». Type de linge et étiquette d'entretien Les symboles d'entretien aident lors du choix du programme correct de lavage.
Mode d'emploi Produits de lavage et additifs Quel produit de lavage et quel additif? N'utilisez que des produits de lavage et des additifs qui conviennent pour utilisation dans une machine à laver. Toujours respecter les indications du fabricant.
Mode d'emploi Exécution du programme de lavage Guide de consultation rapide Le lavage s'effectue selon les étapes suivantes : 0 1. Ouvrir la porte de remplissage et y introduire le linge. 2. Fermer la porte de remplissage. 3. Ajouter le détergent et les additifs. 4. Sélectionner le programme qui convient : – Sélectionner le programme et la température voulus à l'aide du programmateur – et enclencher éventuellement un programme/fonction additionnel(s) 5.
Mode d'emploi Ajouter le produit de lavage et l’additif Recommandations pour les produits de lavage et additifs, voir rubrique “Produits de lavage et additifs”. 0 1. Produits de lavage ouvrir le bac-tiroir produit de lavage jusqu'à la butée. 2. Ajouter le produit de lavage/additif.
Mode d'emploi Sélectionner le programme de lavage Pour le programme approprié, la température correcte et les programmes supplémentaires possibles adaptés aux différents types de linge, consultez le «Tableau de programmes». 0 1. Tournez le programmateur sur le programme de lavage désiré avec la température désirée. Le multiafficheur affiche la durée probable en minutes du programme sélectionné. 3 2.
Mode d'emploi Modifier la vitesse d'essorage/sélectionner un arrêt sans essorage 0 Eventuellement modifier la vitesse d'essorage pour l'essorage final/sélectionner SANS ESSOR.: Enfoncer la touche SANS ESSOR. de manière répétitive jusqu'à ce que la vitesse d'essorage désirée soit affichée (ou que SANS ESSOR. soit allumé). Si vous sélectionnez SANS ESSOR., le linge reste dans la dernière eau de rinçage, il n'est pas essoré.
Mode d'emploi Déroulement du programme de lavage Afficheur de programmes Avant le démarrage, les phases de programme à accomplir afficheur de programmes. Pendant le déroulement du programme, la phase du Programme en cours est allors affichée. Multiaffichage Le temps (en minutes) jusqu'à la fin du programme est indiqué dans le multiaffichage.
Mode d'emploi Modifier le programme de lavage Modifier le programme p. ex. interrompre 0 1. Appuyer sur la touche MARCHE/PAUSE. 2. Mettre le programmateur sur ARRET. Le programme de lavage est interrompu. 3. Si on le souhaite, on peut enclencher un nouveau programme de lavage. Sinon, mettre le programmateur sur VIDANGE, ESSORAGE ou ESSOR. DELICAT et appuyer sur la touche MARCHE/PAUSE. (l'eau est vidangée et le linge sera essoré, le cas échéant.
Mode d'emploi Lavage terminé/Retirer la lessive Lorsqu'un programme de lavage est terminé, l'indication FIN s'allume sur l'afficheur. Lorsque SANS ESSOR. est sélectionné, le témoin clignote à côté de la touche MARCHE/PAUSE. 0 1.
Mode d'emploi Tableau des programmes Lavage Toutes les possibilités ne sont pas reprises dans ce qui suit, mais uniquement celles qui sont le plus utilisées et pertinentes au quotidien. Type de textile, caractéristiques des traitements Quantité maxi. de remplissage (poids sec)1) Choix du programme Température Programme supplémentaire possible Blanc ç 5kg BLANC/COULEURS 95 PRELAV. COURT TACHES Programme économique : Blanc ç 5kg BLANC/COULEURS ECONOMIQUE PRELAV.
Mode d'emploi Séparé Assouplissant/Amidonnage/Imperméabilisation Type de textile Blanc-/Couleurs Quantité maxi. de remplissage (poids sec) Choix du programme 5kg AMIDON. Quantité maxi. de remplissage (poids sec) Choix du programme Rinçage séparé Type de textile Blanc-/couleurs 5kg Défroissable 2,5kg Délicat 2,5kg RINC.
Mode d'emploi Nettoyage et entretien Panneau de commande 0 Attention! N'utilisez pas de produits d'entretien pour meubles ni de produits de lavage agressifs pour le nettoyage du panneau de commande et de ses éléments. Essuyez le panneau de commande avec un chiffon humide. Utilisez de l'eau chaude à cet effet. Bac-tiroir à produits de lavage Il convient de nettoyer régulièrement le compartiment de produits de lavage. 0 1. Tirez le bac-tiroir à produits de lavage jusqu'à la butée. 2.
Mode d'emploi 7. Nettoyez l'ensemble de la zone d'introduction des produits de lavage de la machine à laver, en particulier également les buses à la partie supérieure du bac-tiroir, avec une brosse. 8. Placez le bac-tiroir dans les rails de guidage et insérez-le. Tambour de lavage 0 Le tambour de lavage est en acier inoxydable. Des corps étrangers sujets à la rouille dans le linge peuvent cependant provoquer des dépôts de rouille dans le tambour.
Mode d'emploi Nettoyage de la pompe à lessive Les trombones, les aiguilles, etc., qui ont pu pénétrer dans la machine à laver avec le linge, sont récupérés dans le corps de la pompe à lessive. Des peluches de tissu peuvent se fixer sur ces pièces et boucher la pompe à lessive. Il convient donc de nettoyer la pompe à lessive au moins une fois par an. Attention ! Éteindre la machine à laver avant de procéder au nettoyage de la pompe à lessive et retirer la fiche secteur. 0 1.
Mode d'emploi 6. Remettre le clapet en place. Introduire la tige sur le clapet latéralement dans la fente de guidage et revisser le clapet dans le sens horaire. 7. Refermez le flexible de vidange de secours et le replacer sur son support. 8. Refermer le clapet.
Mode d'emploi Que faire si ... Elimination des dérangements En cas de dérangement, essayez de résoudre par vous-même le problème apparu à l'aide des indications données ici. Si vous faites appel au service après-vente pour résoudre les problèmes évoqués ici ou pour réparer une erreur de manipulation, la visite du technicien du service après-vente ne sera pas gratuite, même pendant la période de garantie.
Mode d'emploi Défaut L'alimentation d'eau ne se fait pas. Le code de défaut E10 apparaît. L'indication ESSORAGE clignote. Cause possible Que faire Le robinet est fermé. Ouvrir le robinet. Redémarrer le programme. La crépine dans le raccordement du tuyau d'alimentation est bouché. Fermer le robinet. Dévisser le flexible du bec du robinet, retirer la crépine et la nettoyer sous l'eau courante Le robinet est entartré ou dé- Examiner le robinet et le fectueux. faire réparer, le cas échéant.
Mode d'emploi Défaut L'eau s’écoule sous la machine à laver. Cause possible Que faire Le raccordement du flexible d'alimentation n'est pas étanche. Visser fixement le flexible. Le tuyau d'évacuation n'est pas étanche. Examiner le tuyau d'évacuation et le remplacer le cas échéant. Le couvercle de la pompe d'évacuation n'est pas correctement scellé. Bien refermer le couvercle. Interrompre le programme, retirer le linge de la porte de Le linge est coincé dans la porte de remplissage. remplissage.
Mode d'emploi Défaut Le linge n'est pas bien essoré, de l'eau résiduelle étant visible dans le tambour. Le code de défaut E20 apparaît. L'indication RINCAGE clignote. Cause possible Que faire Le tuyau d'évacuation est plié. Eliminer le pli. La hauteur maximale d'évacuation (Evacuation 1m par rapport à la position de l'appareil) est dépassée.
Mode d'emploi Défaut Cause possible Que faire Le programme sera poursuivi dès que la coupure de courant aura été rétablie. Eventuellement coupure de courant dû à l'entreprise Coupure de courant en distributrice d'électricité. cours de programme de (la porte de remplissage delavage (Toutes les indimeure, par mesure de sécucations sont éteintes). rité verouillée pendant env. 2 minutes.) Des restants de produits de lavage s'accumulent dans le bactiroir. L'eau de rinçage est trouble.
Mode d'emploi Lorsque les performances de lavage ne sont pas satisfaisantes Si le linge est grisâtre et que du calcaire se dépose dans le tambour • La quantité de produit de lavage est insuffisante. • Un produit de lavage incorrect a été utilisé. • Des taches spéciales n'ont pas subi un traitement préalable. • Le programme ou la température n'a pas été réglé correctement. • En cas d'utilisation de produits de lavage composites, les différents composants n'ont pas été dosés dans les bonnes proportions.
Mode d'emploi Exécution d'une vidange de secours • Lorsque le lave-linge automatique ne vidange plus la lessive, il convient d'effectuer une vidange de secours. • Si la machine à laver se trouve dans un local soumis au gel, une vidange de secours doit être effectuée en cas de risque de gel. De plus: dévissez le flexible d'arrivée d'eau et posez-le sur le sol, vidangez le flexible d'évacuation.
Mode d'emploi Lorsque la lessive est entièrement écoulée: 6. Insérez fermement le bouchon de fermeture dans le flexible de vidange de secours et tournez-le à fond dans le sens des aiguilles d'une montre. 7. Remettez le flexible de vidange de secours dans son support. 8. Replacez le clapet dans le panneau du socle et fermez-le. Sécurité enfants Lorsque la sécurité enfants est enclenchée, la porte de remplissage ne peut plus être fermée et on ne peut plus lancer aucun programme de lavage.
Instructions de montage et de raccordement Instructions de montage et de raccordement Données techniques Réglage en hauteur Quantité de remplissage (dépend du programme) Domaine d'utilisation Vitesse du tambour lors de l'essorage Pression de l'eau env. +10/-6mm max.
Instructions de montage et de raccordement Consignes de sécurité à l'installation • Evitez de basculer la machine à laver sur l'avant ou sur le côté droit (vu de face). Cela pourrait mouiller les composants électriques ! • Vérifiez bien que la machine à laver n'ait pas subi de dommages lors du transport. Vous ne devez en aucun cas effectuer le raccordement d’un appareil endommagé. Adressez-vous à votre fournisseur en cas de dommage constaté sur l'appareil.
Instructions de montage et de raccordement Disposition des appareils Transporter l'appareil • Ne posez pas la machine à laver sur la face frontale ni sur le côté droit (vu de l'avant). Des éléments électriques pourraient devenir humides. • Ne jamais transporter l'appareil sans les protections de transport. N'enlevez les protections de transport qu'une fois arrivé sur le lieu d'installation! Le transport sans protections de transport peut provoquer des dommages à l'appareil.
Instructions de montage et de raccordement 3 42 La clé spéciale A et les couvercles B (2 pièces) et C (1 pièce) sont joints à l'appareil. 3. Enlever la vis D avec ressort à pression à l'aide de la clé spéciale A. 4. Refermer le trou avec le couvercle C. Attention! Appuyer fermement sur le couvercle, de façon à ce qu'il s'encliquette dans la paroi arrière (protection de l'intérieur de l'appareil contre les projections d'eau). 5. Dévisser deux vis E à l'aide de la clé spéciale A. 6.
Instructions de montage et de raccordement Préparer le lieu d'installation • Le plan d'installation doit être propre et sec, exempt de restes de cire et autres revêtements glissants, afin que l'appareil ne puisse pas déraper. Ne pas utiliser de lubrifiants pour faciliter le déplacement. • L'installation sur moquettes à poils longs ou revêtements de sol avec dos mousse n'est pas à recommander, la stabilité de l'appareil n'étant pas garantie dans ce cas.
Instructions de montage et de raccordement Egaliser les inégalités du sol Avec les quatre pieds de réglage vous pouvez compenser les inégalités du sol et adapter la hauteur. La hauteur peut être adaptée dans une plage de +10 ... -5mm. Employez à cet effet la clé spéciale jointe pour enlever les sécurités de transport. 0 1. Faire glisser la clé spéciale jusqu'à la butée sur le boulon à six pans des pieds de réglage. 2.
Instructions de montage et de raccordement Raccordement électrique Vous trouverez les indications concernant la tension électrique, le type de courant et le fusible requis sur la plaque signalétique. La plaque signalétique se trouve en haut derrière la porte de remplissage.
Instructions de montage et de raccordement Alimentation en eau Un flexible à pression de 1,5m de long est livré avec l'appareil. Si un flexible plus long est nécessaire, on doit uniquement utiliser un jeu de flexible complet agréé VDE avec raccords vissés pour flexible, proposé par notre service après vente. – Pour les machines à laver sans Aqua-Control, des jeux de flexibles d'une longueur de 2,2m, 3,5m et 5m sont disponibles.
Instructions de montage et de raccordement Evacuation de l'eau Le flexible d'évacuation de l'eau peut être raccordé soit à un siphon soit accroché dans un évier ou un déversoir ou dans une baignoire. Seuls des flexibles d'origine peuvent être utilisés pour le prolonger (max. 3m au sol et ensuite jusqu'à 80cm de hauteur). Le service après vente tient à disposition des flexibles d'évacuation d'une longueur de 2,7 et 4m. Attention! Veillez absolument à poser le flexible d'évacuation sans plis.
Instructions de montage et de raccordement Hauteurs de refoulement supérieures à 1m Pour vidanger l'eau de lavage/de rinçage, chaque machine à laver possède une pompe de vidange qui transporte le liquide via le flexible d'évacuation jusqu'à une hauteur de 1m, calculée à partir du plan d'installation de la machine. Pour les hauteurs de refoulement supérieures à 1m, veuillez contacter le service après-vente.
Instructions de montage et de raccordement Sous-encastrement sous le plan de travail de la cuisine Attention : Le robinet et la prise secteur doivent demeurer accessibles également après l'installation de la machine. Dans la cas d'un raccordement permanent au secteur, l'appareil devra être séparé de celui-ci par un dispositif multipolaire (N, L1) de sectionnement (p. ex. disjoncteur de sécurité Fi) avec un écartement des contacts de > 3 mm.
Instructions de montage et de raccordement Dimensions de la niche (en mm) Cuisines avec hauteur de travail de 90 cm ou plus 1 Attention ! Lors de l'encastrement dans une cuisine avec une hauteur de travail de 90 cm ou plus, on gardera le plan supérieur de la machine pour éviter ainsi tout risque d'éclaboussures. Sinon on ne peut se prémunir efficacement contre contre les jets et projections d'eau.
Conditions de garantie Conditions de garantie Belgique DÉCLARATION DE CONDITIONS DE GARANTIE. Nos appareils sont produits avec le plus grand soin. Malgré cela, un défaut peut toujours se présenter. Notre service clientèle se chargera de réparer ceci sur demande, pendant ou après la période de garantie. La durée de vie de l'appareil n'en sera pas pour autant amputée. La présente déclaration de conditions de garantie est basée sur la Directive de l'Union Européenne 99/44/CE et les dispositions du Code Civil.
Conditions de garantie 11. Si des appareils sont encastrés, sous-encastrés, fixés ou suspendus de telle sorte que le retrait et la remise en place de ceux-ci dans leur niche d'encastrement prennent plus d'une demi-heure, les frais de prestation qui en découlent seront portés en compte. Les dommages connexes causés par ces opérations de retrait et de remise en place sont à charge de l'utilisateur. 12.
Adresses du service après-vente Adresses du service après-vente Belgique Electrolux Home Products Belgium Consumer services ELECTROLUX SERVICE Bergensesteenweg 719 1502 Lembeek Province de Liège: S.D.E. Rue Gaucet 26 4020 Liege Téléphone Téléfax 02/363.04.44 02/363.04.00 02/363.04.60 04/343.11.60 04/343.47.
Index de mots-clés Index de mots-clés A Additifs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Affichage multiple . . . . . . . . . . . . . . . . . . . Amidonnage . . . . . . . . . . . . . . . . . . . . .12, Arrêt sans essorage . . . . . . . . . . . . . . . . . . . Assouplissant . . . . . . . . . . . . . . . 9, 10, 19, O 10 31 26 21 26 B Bac-tiroir produit de lavage . . . . . . . .10, 19 Blanc . . . . . . . . . . . . . . . . . . . . . . . . 16, 25, 26 C Coton . . . . . . . . . . . . . . . .
Service après-vente Service après-vente Au chapitre «Que faire si ...» sont rassemblés quelques défauts auxquels vous pouvez remédier vous-même. Consultez-le d'abord en cas de panne. Si vous ne trouvez pas d'indications, veuillez vous adresser à votre point de service après-vente. (Vous trouverez les adresses et numéros de téléphone au chapitre «Adresses du service après-vente».) En tout état de cause, veuillez bien préparer l'entretien.
From the Electrolux Group. The world´s No.1 choice. "Le Groupe Electrolux est le premier fabricant mondial d'appareils de cuisine, d'entretien et d'extérieur. Plus de 55 millions de produits du Groupe Electrolux (tels que réfrigérateurs, cuisinières, lave-linge, aspirateurs, tronçonneuses, tondeuses à gazon) sont vendus chaque année pour un montant d'environ 14 milliards de dollars US dans plus de 150 pays à travers le monde." AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.