User manual

Run wash cycle
21
Start the washing program, set the final spin speed or
select RINSE HOLD
0 Check whether the water tap is open.
0 To start the washing machine pull out the program selector.
The pilot light ON illuminates, the washing program starts automati-
cally after six seconds.
0 If necessary reduce the final spin speed for the
final spin or select RINSE HOLD.
– Press the final spin speed button or
– press the button o (RINSE HOLD).
If RINSE HOLD has been selected, the washing
remains in the final rinse water and is not spun.
During the washing program
you can at any time
– alter the setting of the final spin speed,
– select RINSE HOLD,
– alter the temperature setting;
– press the EASY-CARES button
Other settings cannot be altered.
To interrupt the washing program prematurely:
0 Push in program selector.
0 Rotate the program selector clockwise to PUMP OUT.
0 Pull out program selector.