User manual

Run wash cycle
22
End of wash cycle/Removing the washing
The washing program normally ends with the final spin.
After PRE WASH:
3
After PRE WASH, the main wash cycle must be set as desired, the pro-
gram does not continue automatically.
0 Set the main wash cycle desired.
After RINSE HOLD:
After a RINSE HOLD the water must be pumped out first or the washing
spun:
0 Release RINSE HOLD button.
0 Rotate the program selector clockwise to SPIN or SHORT SPIN (washing
becomes spun according to the program group selected and the final
spin speed set),
or
rotate program selector clockwise to PUMP OUT (water is pumped out)
After the program is completed:
3
The door remains locked for safety reasons for 1-2 minutes after the
end of program.
0 Wait 1-2 minutes until the door unlocks before opening.
0 Open the door.
0 Remove the washing.
0 Push in the program selector. The washing machine is now off.
0 Close the water tap.
0 Pull the washing powder compartment out a little so that it can dry.
Leave the door ajar for a while. This helps to prevent stagnant smells
and helps to preserve the door seal.