User manual

Operating Instructions
27
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
Problem Possible cause Remedy
The washing ma-
chine does not
work.
The mains plug is not inserted. Insert the mains plug.
The house fuse has blown. Replace the fuse.
The door is not closed prop-
erly.
Close the door.
There should be an audible
click.
The START/PAUSE button was
not pressed for long enough.
Press and hold the START/
PAUSE button until the pro-
gramme starts.
The door cannot be
closed.
The child safety feature is en-
gaged.
Release child safety feature
(see Section "Child Safety Fea-
ture").
The END indicator
flashes 4 times.
The door is not closed prop-
erly.
Close the door properly.
Start the programme again.
The END indicator
flashes once.
The water tap is closed.
Open the water tap.
Start the programme again.
The filter in the socket of the
inlet hose is blocked.
Close the water tap.
Disconnect the hose from the
water tap, remove the filter
and clean under running wa-
ter.
Water tap is blocked with
limescale or is faulty.
Check the water tap and have
it repaired if necessary.
The END indicator
flashes 8 times.
The programme selector has
not clicked into place cor-
rectly.
First turn the programme se-
lector to OFF, then set the de-
sired programme to the exact
position.