User manual

Instructions for use

Performing a Wash Cycle

Brief guide

A wash cycle consists of the following steps:

1. Open the door and load the washing.

2. Close the door.

3. Add detergent/additives.

4. Set the appropriate wash programme:

– Set the programme and temperature using the programme knob

– Set additional programme functions as required.

5. Change the Spin Speed/press RINSE HOLD (SPÜLSTOPP, ARRET CUVE

PLEINE) as necessary.

6. Start the wash programme by pressing the START/PAUSE (START/PAUSE,

MARCHE/PAUSE) button.

After the wash programme is complete:

Important! If the wash cycle was stopped with Rinse Hold, select

DRAIN (PUMPEN, VIDANGE) or SPIN (SCHLEUDERN, ESSORAGE) before

opening the door.

7. Open the door and take out the washing.

The door can be opened after the DOOR (TÜR, PORTE) light goes off and

the END (ENDE, FIN) light has come on.

8. Switch off the washing machine: Turn the programme knob to OFF

(AUS, ARRET).