User manual

Instructions for use

Changing Spin Speed/Selecting RINSE HOLD

(SPÜLSTOPP, ARRET CUVE PLEINE)

0 To change the Spin Speed for the final rinse or se-

lect RINSE HOLD (SPÜLSTOPP, ARRET CUVE

PLEINE):

Keep pressing the Spin Speed/RINSE HOLD (SPÜL-

STOPP, ARRET CUVE PLEINE) button until the light

for the desired speed (or RINSE HOLD/SPÜLSTOPP,

ARRET CUVE PLEINE) comes on.

If RINSE HOLD (SPÜLSTOPP, ARRET CUVE PLEINE) is selected, the wash-

ing is left to soak in the last rinse water, without spinning.

If the Spin Speed is not changed, the final spin is set automatically ac-

cording to the wash programme:

The speed of intermediate spins depends on the selected programme

and is not adjustable.

Starting the Wash Programme

0 1. Check that the stopcock is open.

2. Starting the wash programme: Press the START/

PAUSE (START/PAUSE, MARCHE/PAUSE) button.

The wash programme starts.

If the END (ENDE, FIN) light flashes 4 times when the START/PAUSE

(START/PAUSE, MARCHE/PAUSE) button is pressed, the door is not

closed properly. If this happens, push the door firmly closed and press

the START/PAUSE (START/PAUSE, MARCHE/PAUSE) button again.

– COTTONS/LINEN

(KOCH-/BUNTWÄSCHE, BLANC COULEURS)

1200 rev/min.

– ENERGY SAVING

(ENERGIE SPAREN, ECONOMIQUE)

1200 rev/min.

– EASY-CARES/EASY IRON

(PFLEGELEICHT/LEICHTBÜGELN,

TEXTILES MELANGES/FACILE A REPASSER)

1000 rev/min.

– DELICATES (FEINWÄSCHE, DELICAT) 1000 rev/min.

– WOOL/SILK (WOLLE/SEIDE, LAINE/SOIE)

P (Handwash)

1000 rev/min.