User manual

Instructions for use
31
Washing is not spun
thoroughly and water
remains visible in the
drum.
The END (ENDE, FIN)
indicator flashes twice.
There is a kink in the outlet
hose.
Straighten the hose.
The maximum pump height
(outlet height 1m from the
washing machine’s installa-
tion surface) has been
exceeded.
Contact Customer Service,
who will be able to provide
an adaptor kit for pump lifts
greater than 1m as a special
accessory.
The drain pump is blocked.
Switch off the machine and
disconnect the mains plug.
Clean the drain pump.
Using a siphon connection:
the siphon is blocked.
Clean the siphon.
The door cannot be
opened when the
washing machine is
switched on.
The indicator lights
START/PAUSE (START/
PAUSE, MARCHE/
PAUSE) and DOOR
(TÜR, PORTE) come on.
Door is locked due to high
water level or high tempera-
ture.
Wait until the wash pro-
gramme has ended, the
DOOR (TÜR, PORTE) light has
gone off and the END (ENDE,
FIN) light has come on.
If the door has to be opened:
Turn the programme knob to
OFF (AUS, ARRET); turn the
programme knob to DRAIN
(PUMPEN, VIDANGE). Press
the START/PAUSE (START/
PAUSE, MARCHE/PAUSE)
button.
After the water has drained,
the door can be opened.
Problem Possible Cause Remedy