User manual

Instructions for use
24
Selecting an Additional Programme Function
The additional programme functions QUICK WASH (COURT/KORT) or
STAIN (TACHES/VLEKKEN) can still be selected after the programme has
started.
1. Press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button.
2. Press the QUICK WASH (COURT/KORT) or STAIN (TACHES/VLEKKEN) but-
ton.
3. Press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button again.
The wash programme continues.
Changing the Spin Speed
Spin speed can still be changed or RINSE HOLD (ARRET CUVE PLEINE/
SPOELSTOP) set, while the programme is running.
1. Press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button.
2. Change the spin speed with the Spin Speed/RINSE HOLD (ARRET CUVE
PLEINE/SPOELSTOP) button.
3. Press the START/PAUSE (MARCHE/PAUSE, START/PAUZE) button again.
The wash programme continues.
End of Wash Cycle/Removing the Washing
When a wash cycle is completed, the END (FIN/EINDE) light on the
Programme Progress Display comes on.
If RINSE HOLD (ARRET CUVE PLEINE/SPOELSTOP) was selected, the indi-
cator lights DOOR (PORTE/DEUR) and END (FIN/EINDE) come on.
1. After a Rinse Hold, the water must first be drained:
– Either turn the programme knob to OFF (ARRET/UIT), then to DRAIN
(VIDANGE/POMPEN) and press the START/PAUSE (MARCHE/PAUSE,
START/PAUZE) button (the water is drained without spinning),
or
– turn the programme knob to OFF (ARRET/UIT), then to SPIN
(ESSORAGE/CENTRIFUG.) and press the START/PAUSE (MARCHE/
PAUSE, START/PAUZE) button (the water is drained and the washing is
given a spin; the spin speed can be altered during the spin).
When this stage of the programme is completed, the END (FIN/EINDE)
light comes on.
2. Opening the door.
The door can be opened after the DOOR (PORTE/DEUR) light goes off
and the END (FIN/EINDE) light has come on.
3. Take out the washing.