LAVAMAT W 830 Washing Machine User information
Dear Customer, Please read this user information carefully. Pay particular attention to the section "Safety" on the first Info pages. Please keep this user information in a safe place for later reference. Pass it on to any future owners of the unit. 1 The warning triangle and /or signal words (Warning!, Caution!, Important!) emphasise information which is important for your safety or for the unit's functional reliability. It is imperative that this information is observed. 1.
Contents CONTENTS Operating Instructions .................................... 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Environmental tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unit description . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Programme Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Separate Conditioning/Starching/Finishing . . . . . . . . . . . . . . . . . . . . . . . . Separate Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water drain . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions OPERATING INSTRUCTIONS 1 Safety The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. However, as manufacturers we regard it as our responsibility to inform you about the following safety instructions. Before Using for the First Time • Refer to the "Installation and Connection Instructions" further on in this user information.
Operating Instructions Child Safety • Packaging materials (e.g. films, polystyrene) can be dangerous for children. Risk of suffocation! Keep packaging away from children. • Children frequently cannot recognise hazards involved in handling electrical appliances. Therefore, ensure that they are properly supervised during operation and never allow children to play with the washing machine -there is a risk that they can lock themselves inside it.
Operating Instructions 2 Disposal Disposing of the Packaging Material! Dispose of the packaging of your washing machine correctly. All pakkaging materials used are environmentally-compatible and recyclable. • Plastic parts are identified with internationally standardised abbreviations: >PE< for polyethylene, e.g. packing films. >PS< for polystyrene, e.g. cushion parts (always CFC-free) >POM< for polyoxymethylene, e.g. plastic clips.
Operating Instructions Unit description Front view Drawer for detergent and care agent Control panel Rating plate (behind filling door) Main door Flap in front of drain pump Screw feet (height-adjustable) Drawer for Washing Powder and Care Agent In-wash stain treatment Main detergent (powder) and watersoftener if required Pre-wash detergent/ soaking agent Liquid care agent (conditioner, finisher, starch) 9
Operating Instructions Control Panel Spin speed button ON/OFF button with power indicator light STAIN button Program selector RINSE HOLD button QUICK WASH button Temperature selector SOAKING button Programme Knob The programme knob determines the type of wash cycle (eg. water level, drum movement, number of rinses, spin speed) according to the type of the articles to be washed.
Operating Instructions RINSE Separate rinse followed by spin or rinse hold, eg. for rinsing handwashed cottons/linen. 3 Rinse hold means: The washing remains lying in the last rinsing water. It is not spun. CONDITION Separate conditioning, separate starching or separate finishing for damp cottons/linen (1 rinse, liquid care agent is flushed in from the compartment æ followed by spin or rinse hold). SPIN Spin after rinse hold or separate spin for handwashed cottons/linen.
Operating Instructions GENTLE RINSE Separate gentle rinse followed by short spin or rinse hold, eg. for rinsing hand-washed woollens or delicates. CONDITION Separate gentle conditioning for damp woollens or delicates (1 gentle rinse, liquid care agent is washed in from the compartment æ followed by short spin or rinse hold). PUMP OUT Water pumped out without spin, eg. after rinse hold. Temperature Selector The following settings are possible: COLD, 30, 40, 50, 60, E, 80, 95 °C.
Operating Instructions STAIN For dealing with heavily soiled or stained washing (in-wash stain treatment is added at the optimum time during the course of the programme). STAIN can be used in conjunction with the programme knob settings: – PRE WASH COTTONS/LINEN; – MAIN WASH; – PRE WASH EASY-CARES; – EASY-CARES. QUICK WASH Shorter washing cycle for lightly soiled washing. QUICK WASH can be used in conjunction with the programme knob settings: – MAIN WASH; – EASY-CARES.
Operating Instructions Consumption values and time requirements The values for selected programmes in the following tables were determined under standardized conditions. They are nonetheless a useful guide for domestic use. Temperature selector Filling quantity in kg MAIN WASH 95 5 57 1.90 140 MAIN WASH 601) 5 54 0.95 128 MAIN WASH 40 5 54 0.60 115 EASY-CARES 40 2.5 45 0.40 65 DELICATES 30 2.5 40 0.25 40 WOOL 30 2 43 0.
Operating Instructions Before the First Wash 1. Pull the washing powder drawer out slightly. 2. Pour about 1 litre of water through the washing powder drawer into the washing machine. The next time a programme is started the solution container will be closed and the eco-sluice can function correctly. 3. Run one wash cycle without washing: – Programme knob on position MAIN WASH; – Temperature 95 °C; – Only add half the quantity of detergent recommended by the manufacturer for a full load.
Operating Instructions • Mix small and large items. This improves the washing effect and the washing is more favourably distributed during spinning. • Fluff washing before placing into the washing machine. • Do not place folded washing into the drum. • Pay attention to the care instruction "wash separately" and "wash separately several times". Washing Types and Care Symbols The care symbols help you choose the correct wash programme. The washing should be sorted according to type and care symbol.
Operating Instructions Washing Detergents and Care Agents Which detergent and care agent? Use only detergents and care agents which are suitable for use in washing machines. Always follow the manufacturer's instructions.
Operating Instructions Running a Wash Cycle Brief Instructions To run a wash cycle: 1. Open the door and fill with washing. 2. Close the door. 3. Add washing detergent / care agent. 4. Set the wash programme – Set the programme using the programme knob; – Set the temperature using the temperature selector; – Set any additional programme required. 5. If necessary, change the spin speed or select RINSE HOLD. You can alter this setting and the temperature at any time during the wash. 6. Press ON/OFF button.
Operating Instructions Add Washing Detergent and/Care Agent 3 Refer to the information on washing detergents and care agents, see section entitled “Washing Detergents and Care Agents“. 1. Pull out the washing powder drawer as far as it will go. 2.
Operating Instructions Setting the Wash Programme 3 For a suitable programme, the right temperature and possible additional programmes for the relevant type of wash, refer to the “Programme Tables“. Important! Only turn the programme knob in a clockwise direction. 1. Set the programme knob to the desired wash programme. 2. Set the temperature selector to the desired temperature. 3.
Operating Instructions Changing the Spin Speed/Selecting Rinse Hold If required, change the spin speed for the final spin speed or select RINSE HOLD: – Press the spin speed button or – press RINSE HOLD button. If RINSE HOLD is selected the washing will remain in the last rinse water; it will not be spun.
Operating Instructions Wash Programme Progress Programme progress display The programme knob is also a programme progress display. It turns clockwise as the programme progresses until it ends, showing the stage of the programme that is currently being carried out. The speed at which the programme knob turns varies.
Operating Instructions Wash Cycle Completed/Removing Washing A wash programme normally ends with the final spin. If SOAKING has been selected: Release SOAKING button. Main wash for COTTONS/LINEN or EASYCARES will run. If RINSE HOLD has been selected: The water must first be pumped out or the washing must still be spun.
Operating Instructions Programme Tables Not all possible settings are listed below - only the most appropriate and those most commonly used in everyday operation.
Operating Instructions Separate Rinse Max. Filling Quantity (dry weight) Programme Knob 5kg RINSE COTTONS/LINEN Easy-cares 2.5kg RINSE EASY-CARES Delicates 2.5kg Woollens 2kg Type of Washing Cottons/Linen GENTLE RINSE DELICATES/WOOL Separate Conditioning/Starching/Finishing Max. Filling Qantity (dry weight) Programme Knob 5kg CONDITION COTTONS/LINEN Easy-cares 2.5kg CONDITION EASY-CARES Delicates 2.
Operating Instructions Cleaning and Care Control panel Important! Do not use any furniture cleaning agents or aggressive cleaning agents in order to clean panel and control parts. Wipe control panels with a damp cloth. When doing so, use warm water. Detergent Drawer The detergent drawer should be cleaned from time to time. 1. Pull the detergent drawer out as far as it will go. 2. Remove the detergent drawer by pulling sharply. 3. Take the conditioner insert out of the middle compartment. 4.
Operating Instructions 7. Use a brush to clean the entire rinsing-in section of the washing machine, particularly also the nozzles on the top side of the rinsingin chamber. 8. Set the detergent drawer into the guide tracks and push in. Washing Drum The washing drum is made of stainless steel. Rusting foreign bodies in the washing can cause rust deposits on the drum.
Operating Instructions Cleaning the drain pump Paper clips, nails and so on can sometimes get into the washing machine with the washing and remain in the drain pump casing. Fluff and strands of fabric can gather on these items and block the drain pump. Therefore the drain pump should be cleaned at least once a year. Warning! Switch off the washing machine and pull out the mains plug before cleaning the drain pump! 1. First carry out emergency emptying (see section "Carrying out emergency emptying"). 2.
Operating Instructions What to do if ... Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. Problem Possible Cause The mains plug is not plugged in. The washing machine does not work. The door cannot be closed.
Operating Instructions Problem The washing machine vibrates during operation or wobbles. Possible Cause Remedy The height-adjustable screw feet are not correctly set. Adjust the feet according to the instructions for installation and connection. There is very little washing in This does not impair the the drum (e.g. only one function. dressing gown). The water could not be completely pumped out before spinning because the drain hose is bent or the drain pump is blocked.
Operating Instructions Problem Washing is heavily creased. Possible Cause Remedy Probably too much washing was packed into the drum. Follow instructions for the maximum filling quantity (see Programme Tables). The drain hose is bent. Remove the bend. Contact customer service; a Maximum pump head (outlet retrofit kit is available as a head 1m from unit's floor special accessory for pump Washing has not been surface) exceeded. heads over 1m. spun properly.
Operating Instructions If the washing results are not satisfactory If the washing has turned grey and if limescale is deposited in the drum, then • Too little detergent was used. • The wrong detergent was used. • Special soiling was not pre-treated. • Program or temperature not set correctly. • If multi-component detergents are used, the individual components were not used in the correct ratio.
Operating Instructions Carrying out emergency drainage • If the washing machine no longer pumps off the washing solution, emergency drainage must be performed. • If the washing machine is in a room where there is a risk of frost, emergency drainage must be performed if there is a possibility of frost. In addition: unscrew the inlet hose form the water tap and place it on the floor. Empty the drainage hose.
Operating Instructions When the water is completely drained: 6. Push the plug securely into the emergency drainage hose and turn it clockwise to secure it. 7. Replace the emergency drainage hose in its holder. 8. Put on the flap and close. Child Safety Feature If the child safety feature is set, the filling door can no longer be closed and no washing program can be started. Setting the child safety feature Use a coin to turn the rotary knob on the inside of the filling door clockwise as far as it will go.
Installation and connection instructions INSTALLATION AND CONNECTION INSTRUCTIONS Installation Safety Precautions • Do not tilt the washing machine onto its front or onto its right side (viewed from the front). Electronic components can get wet. • Check the washing machine for transport damages. A damaged unit must never be put into operation under any circumstances. In the event of damage, please contact your supplier.
Installation and connection instructions Installation of the appliance 3 Washing machines with curved panels are not suitable for installing under units. Transporting the appliance • Do not place the washing machine on its front or on its right side (viewed from the front). Otherwise, electrical components can get wet. • Never transport the unit without the transport safeguard. Do not remove the transport safeguard until the appliance is at the installation location.
Installation and connection instructions 3 The special key E and the caps D (2 each) and G (1 each) are supplied with it. 3. Unscrew the two screws with the special spanner. 4. Unscrew the 4 screws B with special spanner E. 5. Remove the transport rail C. 6. Screw the 4 screws B back in. 7. Close the 2 large holes with the caps D. Important! Press in the caps with sufficient strength so that they engage in the rear panel (protects the inside of the units against splash water). 8.
Installation and connection instructions Prepare the installation place • The installation surface must be clean and dry, free of floor polish residues and other greasy coatings so that the unit does not slip away. Do not use lubricants as a sliding aid. • Installation on a high-veil carpet or floor tiles with soft sponge backs is not recommended because the standing safety of the appliance is then no longer ensured.
Installation and connection instructions Compensate for floor unevenness Floor unevenness can be compensated for and the height can be corrected with the four adjustable screw feet. The height can be adjusted in the range +10 .. -5mm. To adjust the feet use the special spanner supplied for removing the transport braces. 1. Slide the special key firmly onto the hexagon head of the threaded foot as far as it will go. 2. Adjust the screw feet so that the unit is horizontal and stable.
Installation and connection instructions Electrical connection Details of the mains voltage, current type and required fuses can be found on the rating plate. The rating plate is located at the top above the filling door. For permanent electrical connection within the electrical circuit, provisions must be made which allow for electrical disconnection of the appliance from the mains with a contact opening of at least 3 mm at all poles.
Installation and connection instructions Water inflow A pressure hose of 1.35m in length is supplied. If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible. – Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing machines without Aqua-Control. – Hose sets in lengths of 2.0m, 2.9m and 3.5m are available for washing machines with Aqua-Control.
Installation and connection instructions Water drain The drainage hose can either be connected to a siphon or hung in a wash basin or discharge basin or a bath tub. Only original hoses may be used for extensions (max. 3m laid on the floor and then up to 80cm high). Customer Service stocks drainage hoses in lengths of 2.7 and 4m. Important! It is essential to lay the drainage hose without kinks. Water drain-off inside a siphon The grommet on the hose end fits all standard siphon types.
Installation and connection instructions Technical data Adjustment possibility Filling quantity (program-dependent) Area of use Drum speed, spinning Water pressure Approx. +10 / -5mm max. 5kg Domestic See rating plate 1-10 bar (= 10 - 100 N/cm2 = 0.1 - 1.
Warranty conditions / Customer service centres WARRANTY CONDITIONS / CUSTOMER SERVICE CENTRES Weitere Kundendienststellen im Ausland In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden. Further after-sales service agencies overseas In these countries our AEG agents’ own guarantee conditions are applicable. Please obtain further details direct.
Warranty conditions / Customer service centres Bahrain/Arabian Gulf A.A. Zayani & Sons P.O. Box 9 32 Bahrain Tel.: 261060 Croatia Electrolux D.O.O. Suplova 7 10000 Zagreb Tel.: 1 61 19512 Fax: 1 61 19513 New Zealand Euro-Life New Zealand Ltd. Privat Bag 58 Symonds Street Auckland Tel.: (09) 525 2222 Bulgaria Electrolux Bulgaria E.O.O.D. 91 Levski Blvd. 1000 Sofia Tel.: 2 806676 Fax. 2 980 5276 Kuwait/Arabian Gulf Ali Al-Ghanim Est. P.O. Box 10 83 Tel.
Warranty conditions / Customer service centres Singapore Japan Arzbergh Engineering Electrolux Japan Ltd. Yasuda Warehouse 4F 3-3-12 19 Tanglin Road 06-07 Singapore 247909 Heiwajima Ota-Ku Tel.: 65 7356572 Tokyo Fax: 7351124 Tel.: 81 3 3544 3363 Fax: 81 3 3763 6143 46 Slovenia Electrolux Slovenia D.O.O. Traska Ul. 132 1000 Ljubljana Tel.: 61 1234 137 Fax: 61 1234 238 Thailand OLYMPIA Thai Ltd. 44 Ratchadapisek Road 10320 Bangkok Tel.: 2 513 6111 Fax: 2 513 2574 Slovakia Rep. Electrolux Slovakia S.R.O.
Index INDEX C Care agent . . . . . . . . . . . . . . . . . . . . 9, 17, Care symbols . . . . . . . . . . . . . . . . . . . . . . . . Child safety feature . . . . . . . . . . . . . . .29, Conditioner . . . . . . . . . . . . . . . . . . . . . . . 9, Conditioning . . . . . . . . . . . . . . . . . . . . .11, Cottons . . . . . . . . . . . . . . . . . . .10, 16, 24, Curtains . . . . . . . . . . . . . . . . . . . . . . . . . . . . Customer Service . . . . . . . . . . . . .
Service SERVICE In the chapter "What to do if...“ , some faults are listed which you can remedy yourself. Look there first if a fault occurs. If you do not find any information there, please consult your Customer Service. (You can find the addresses and telephone numbers in the section "Customer Service Centres“.) Always prepare in advance for the discussion. By doing so you will simplify the diagnosis and the decision on whether customer service is necessary. Note the PNC number and S. number.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.
