LB3281 USER MANUAL IT Istruzioni per l’uso Lavabiancheria
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA.................................................................................3 2. ISTRUZIONI DI SICUREZZA........................................................................................ 4 3. INSTALLAZIONE..........................................................................................................6 4. DESCRIZIONE DEL PRODOTTO............................................................................. 10 5. PANNELLO DEI COMANDI......
ITALIANO 1. 3 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com • • • • • • • • • Non superare il volume di carico massimo di 8 kg (consultare il capitolo “Tabella dei programmi”). La pressione di funzionamento dell'acqua nel punto di ingresso dal collegamento esterno deve essere compresa fra 0.5 bar (0.05 MPa) e 8 bar (0.8 MPa). Le aperture di ventilazione alla base (ove previste) non devono essere coperte da un tappeto, da una moquette o da eventuali rivestimenti per pavimenti.
ITALIANO • Accertarsi che l'aria circoli liberamente tra l'apparecchiatura e il pavimento. • Non installare l'apparecchiatura direttamente sullo scarico a pavimento. • Regolare i piedini per disporre dello spazio necessario tra l'apparecchiatura e il pavimento. • Non installare l'apparecchiatura in condizioni in cui non è possibile aprire completamente la porta dell'apparecchiatura stessa. • Non collocare un contenitore sotto l'apparecchiatura per raccogliere possibili perdite.
www.aeg.com • Togliere il blocco porta per evitare che bambini o animali restino intrappolati nel cestello. • Smaltire l'apparecchiatura in conformità coi requisiti locali per lo smaltimento di componenti elettrici ed elettronici (WEEE). 3. INSTALLAZIONE AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 3.1 Disimballo AVVERTENZA! Prima di installare l'apparecchiatura, rimuovere tutto il materiale di imballaggio e i bulloni per il trasporto. AVVERTENZA! Utilizzare i guanti. 4.
ITALIANO 7 1 2 8. Sollevare l’apparecchiatura in posizione verticale. 9. Staccare il cavo di alimentazione e il tubo di scarico dagli appositi supporti. Si può vedere dell'acqua fuoriuscire dal tubo di scarico. Questa condizione è imputabile alle prove con acqua eseguite sulle apparecchiature in fabbrica. 10. Togliere i tre dadi con la chiave fornita insieme al dispositivo. 11. Estrarre i distanziatori in plastica. 12. Mettere nei fori i cappucci in plastica contenuti nel sacchetto del manuale.
www.aeg.com 45 20 O O x4 L'apparecchiatura deve essere in piano ed appoggiata in modo stabile. Una corretta regolazione del livello dell'apparecchiatura ne impedisce la vibrazione, il rumore e il movimento durante il funzionamento. Assicurarsi che il tubo di carico non sia in posizione verticale. 3. Ove necessario, allentare il dado ad anello per sistemarlo nella posizione corretta. 4. Collegare il tubo di carico dell'acqua a un rubinetto dell'acqua fredda con filettatura 3/4". 3.
ITALIANO Il settore rosso nella finestra "A" mostra questo problema. A In tal caso, chiudere il rubinetto dell'acqua e contattare il Centro di Assistenza autorizzato per sostituire il tubo. 3.5 Scarico dell'acqua Il tubo di scarico dovrebbe trovarsi a un'altezza non inferiore a 60 cm e non superiore a 100 cm. È possibile prolungare il tubo di scarico fino a un massimo di 400 cm. Contattare il Centro Assistenza autorizzato per l'altro tubo di scarico e la prolunga.
www.aeg.com Accertarsi che il tubo di scarico formi una curva per evitare che particelle passino dal lavandino all'apparecchiatura. 6. Posizionare il tubo direttamente in una conduttura di scarico incassata nel muro del localee serrare con una pinza. 5. Senza la guida del tubo flessibile in plastica, verso il sifone di un lavandino - Fissare il tubo al sifone, e serrarlo con una pinza. Fare riferimento all'immagine. 4. DESCRIZIONE DEL PRODOTTO 4.
ITALIANO 11 4.2 Panoramica dell'apparecchiatura 1 2 3 9 8 10 4 5 11 12 6 7 1 2 3 4 5 6 7 Piano di lavoro Erogatore del detersivo Pannello comandi Maniglia dell'oblò Targhetta dei dati Filtro della pompa di scarico Per mettere in piano l'elettrodomestico 8 9 10 11 12 Tubo flessibile di scarico Collegamento tubo di ingresso Cavo di alimentazione Bulloni per il trasporto Supporto tubo 5. PANNELLO DEI COMANDI 5.
www.aeg.com 1 Selettore dei programmi 2 Display 3 Tasto a sfioramento Eco (Eco) 4 Tasto a sfioramento Risparmio tempo (Risparmio tempo) 5 Tasto a sfioramento Risciacquo (Risciacquo) • Opzione Extra risciacquo 8 Tasto a sfioramento Partenza ritardata (Avvio Ritardato) 9 Tasto a sfioramento Steam Plus (Super Vapore) 10 Tasto a sfioramento Riduzione centrifuga (Centrifuga) • Opzione No cent.
ITALIANO La spia digitale può mostrare: • Durata del programma (ad esempio • Tempo di ritardo (ad esempio ). oppure ). • fine del Ciclo ( ). • Codice di avvertenza (ad esempio: ). Spia fase di lavaggio. Lampeggia durante il pre-lavaggio e durante la fase di lavaggio. Spia fase di risciacquo. Lampeggia durante la fase di risciacquo. Quando l'opzione Più morbido è attivata compare l'indicatore . Indicatore di fase centrifuga e scarico. Lampeggia durante la fase di centrifuga e scarico.
www.aeg.com 6. SELETTORE E TASTI 6.1 Acceso/Spento Premendo questo pulsante per alcuni secondi sarà possibile attivare o disattivare l'apparecchiatura. Quando l'apparecchiatura viene accesa o spenta, si sentono due suoni diversi. Quando la funzione Stand-by disattiva automaticamente l'apparecchiatura per ridurre il consumo energetico, in alcuni casi potrebbe essere necessario attivare nuovamente l'apparecchiatura. Per ulteriori dettagli rimandiamo al paragrafo Stand-by nel capitolo Utilizzo quotidiano.
ITALIANO L'apparecchiatura esegue solo la fase di scarico del programma di lavaggio selezionato. Il display mostra l'indicatore (freddo), e l'indicatore (no centrifuga) e l'indicatore . • opzione Solo centrifuga (Salto delle fasi lavaggio e risciacquo) . L'apparecchiatura esegue solo la fase di centrifuga del programma di lavaggio selezionato. Il display mostra l'indicatore (freddo), l'indicatore di fase velocità della centrifuga.
www.aeg.com Questa opzione aggiunge alcuni risciacqui al programma di lavaggio selezionato. Usare questa opzione per le persone allergiche ai residui di detersivi e in zone dove l'acqua è dolce. Questa opzione aumenta leggermente la durata del programma. • Salto della fase di lavaggio - opzione 6.10 Eco Impostare questa opzione per indumenti con livello di sporco normale, lavati a 30°C o a temperature superiori.
ITALIANO Programma Descrizione programma Cotoni Cotone bianco e colorato. Sporco normale e leggero. Programmi standard per i valori di consumo dell'etichetta energetica.Conformemente alla normativa 1061/2010, il programma a 60 °C e il programma Cotoni a 40 °C con l’opzione 17 Cotoni sono rispettivamente il "Programma cotone standard a 60°C" e il "Programma cotone standard a 40°C".
www.aeg.com Programma Outdoor Descrizione programma Non usare ammorbidente e fare in modo che non vi siano residui di ammorbidente nel cassetto del detersivo. Capi sportivi in tessuti sintetici. Questo programma è stato pensato per lavare in modo delicato indumenti sportivi ed è anche adatto per abbigliamento sportivo come ad esempio vestiti da palestra, ciclismo, jogging e articoli simili. Il carico di bucato consigliato è 2.5 kg.
ITALIANO Programma Pulizia 19 Descrizione programma Ciclo di manutenzione per pulire e rinfrescare il cesto e rimuovere i residui che potrebbero produrre odori. Per ottenere i migliori risultati, utilizzare questo ciclo una volta al mese. Prima di eseguire questo ciclo, togliere tutti gli indumenti dal cesto. Nel cassetto del detersivo per la fase di lavaggio, portare l'inserto dello scomparto in posizione verticale.
www.aeg.com Programma Temperatura predefinita Gamma di temperatura Velocità massima di cen- Carico massitrifuga mo Gamma velocità centrifuga Anti-Allergie 60 °C 1200 giri/minuto 1200 giri/min - 400 giri/min 8 kg 20 min.
■ ■ Ammollo ■ ■ ■ ■ ■ Risciacqui extra ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Risparmio tempo 3) ■ ■ ■ Avvio Ritardato ■ ■ ■ Super Vapore4) ■ ■ ■ ■ ■ Più morbido ■ ■ ■ ■ ■ Jeans ■ 21 Pulizia Outdoor 20 min. - 3 kg Anti-Allergie Delicati ■ Vapore Sintetici Macchie1) Lana/Seta Cotoni Fasi del programma ITALIANO Opzioni Risciacquo unico 2) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) Questa opzione non è utilizzabile con temperature inferiori a 40 °C.
www.aeg.com 8. IMPOSTAZIONI 8.1 Sicurezza bambino Questa opzione consente di evitare che i bambini possano giocare con il pannello dei comandi. per circa 6 secondi. Se si disattivano i segnali acustici, gli stessi continueranno a funzionare in caso di malfunzionamento dell'apparecchiatura. • Per attivare/disattivare questa e opzione, toccare i tasti contemporaneamente fino a che la spia non si accende/spegne sul display. Attivazione dell'opzione: e sfiorare contemporaneamente 8.
ITALIANO 5. Impostare e avviare un programma per il cotone alla massima temperatura senza carico all'interno del cesto. 23 In questo modo si rimuoveranno eventuali residui di lavorazione dal cesto e dalla vasca. 10. UTILIZZO QUOTIDIANO AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 10.1 Attivazione dell'apparecchiatura 1. Inserire la spina nella presa. 2. Aprire il rubinetto dell’acqua. 3. Premere il tasto Acceso/Spento per alcuni secondi per attivare l'apparecchiatura.
www.aeg.com Dopo un ciclo di lavaggio, ove necessario, rimuovere gli eventuali residui di detersivo dal cassetto del detersivo. 10.4 Controllare la posizione dell'inserto 1. Estrarre il cassetto del detersivo fino all'arresto. 2. Abbassare la leva per estrarre il contenitore. 1 2 3. Per utilizzare il detersivo in polvere, ruotare l'inserto verso l'alto. 4. Per utilizzare il detersivo liquido, ruotare l'inserto verso il basso.
ITALIANO programma corrispondente si accende. La spia del tasto Avvio/Pausa (Start/ Pause) lampeggia. Il display mostra il carico massimo dichiarato per il programma, la temperatura predefinita, la velocità di centrifuga massima, le indicazioni sulla fase di lavaggio (ove disponibili) e una durata indicativa del programma. 2. Per modificare la temperatura e/o la velocità di centrifuga, premere i relativi tasti. 3. Qualora lo si desideri, impostare una o più opzioni toccando i relativi tasti.
www.aeg.com 2. Al termine del rilevamento del carico si spegne e i puntini l'indicatore del tempo smettono di lampeggiare. La durata del programma verrà regolata di conseguenza, e potrebbe aumentare o diminuire. Dopo altri 30 secondi, inizia il riempimento dell'acqua. Al termine del rilevamento del carico, in caso di sovraccarico del cesto, l'indicatore lampeggia sul display: In questo caso, per 30 secondi, sarà possibile mettere in pausa l'apparecchiatura e togliere gli indumenti in eccesso.
ITALIANO Qualora la fase ProSense sia già stata eseguita e il riempimento di acqua sia già partito, il nuovo programma inizia senza ripetere la fase ProSense. L'acqua e il detersivo non vengono scaricati per evitare sprechi. Il display mostra la durata massima del programma, aggiornandola 20 minuti dopo l'inizio del nuovo programma. 10.12 Apertura dell' oblò Se la temperatura e il livello dell'acqua nel cesto sono troppo elevati e/o il cesto ancora gira, non è possibile aprire l’oblò.
www.aeg.com La spia indicatore o si spegne, mentre l'indicatore lampeggia e poi si spegne. 3. Al termine del programma, una volta ,è spenta la spia di oblò bloccato possibile aprirlo. 4. Premere il tasto Acceso/Spento per alcuni secondi per disattivare l'apparecchiatura. In ogni caso l'apparecchiatura svuota l'acqua automaticamente dopo circa 18 ore. 10.
ITALIANO 11.2 Macchie ostinate 11.4 Consigli ecologici Per alcune macchie, acqua e detersivo non è sufficiente. • Impostare un programma senza la fase di prelavaggio per lavare la biancheria normalmente sporca. • Avviare un programma di lavaggio con il carico massimo di biancheria consentito. • Qualora le macchie vengano pretrattate, sarà possibile usare un prodotto per rimuovere le macchie quando viene impostato un programma a basse temperature.
www.aeg.com Esaminare a intervalli regolari il cesto al fine di controllare la presenza di calcare. I detersivi normalmente disponibili in commercio contengono già addolcitori, ma consigliamo di eseguire di tanto in tanto un ciclo col cesto vuoto e un prodotto disincrostante. Attenersi sempre alle istruzioni riportate sulle confezioni dei prodotti. 12.
ITALIANO 3. Verificare che tutti i residui di detersivo vengano rimossi dalla parte superiore e inferiore dell'incasso. Servirsi di una spazzola piccola per pulire l'incasso. 31 AVVERTENZA! • Non togliere il filtro durante il funzionamento dell'apparecchiatura. • Non pulire la pompa se l'acqua presente nell'apparecchiatura è calda. Attendere che l'acqua si raffreddi. Procedere come segue per effettuare la pulizia della pompa: 1. Aprire il coperchio della pompa. 4.
www.aeg.com 5. Quando la ciotola è piena di acqua, capovolgere il filtro e svuotare il contenitore. 6. Ripetere i passaggi 4 e 5 fino a che l'acqua non smette di fuoriuscire. 7. Ruotare il filtro in senso antiorario per estrarlo. 11. Ricollocare il filtro nelle guide speciali ruotandolo in senso orario. Accertarsi di chiudere correttamente il filtro per evitare perdite. 12. Chiudere il coperchio della pompa. 1 2 8. Se necessario, togliere la lanugine e gli oggetti dall'incasso del filtro. 9.
ITALIANO 12.8 Pulizia del tubo di carico e del filtro della valvola 33 posizione verticale), a seconda della posizione del rubinetto dell'acqua. Consigliamo di pulire i due filtri sul tubo di ingresso e la valvola a intervalli regolari per rimuovere eventuali depositi accumulatisi nel corso del tempo: 1. Togliere il tubo di ingresso del rubinetto e pulire il filtro. 45° 1 20° 12.9 Scarico di emergenza 2 3 2. Togliere il tubo di ingresso dall'apparecchiatura allentato il dado dell'anello.
www.aeg.com AVVERTENZA! Accertarsi che la temperatura sia superiore a 0°C prima di utilizzare nuovamente l'apparecchiatura. Il produttore declina ogni responsabilità per danni causati da basse temperature. 13. RISOLUZIONE DEI PROBLEMI AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 13.1 Introduzione L'apparecchiatura non si avvia o si blocca durante il funzionamento. Cercare dapprima di risolvere il problema (fare riferimento alla tabella).
ITALIANO 35 13.2 Possibili guasti Problema Possibile soluzione Il programma non si avvia. • Verificare che la spina sia collegata alla presa elettrica. • Controllare che l’oblò dell’apparecchiatura sia chiuso. • Assicurarsi che il fusibile all'interno del quadro elettrico non sia danneggiato. • Assicurarsi di aver premuto il tasto Avvio/Pausa (Start/ Pause). • Se è stata impostata la Partenza ritardata, annullare l'impostazione o attendere il termine del conto alla rovescia.
www.aeg.com Problema Possibile soluzione • Assicurarsi che i raccordi dei tubi dell'acqua siano serrati e non vi siano perdite d'acqua. Presenza di acqua sul pa- • Verificare che i tubi di carico e scarico dell'acqua non siano vimento. danneggiati. • Assicurarsi di utilizzare il detersivo adeguato e la giusta quantità. Non è possibile aprire l'oblò. • Verificare che sia stato selezionato un programma di lavaggio che si conclude con l'acqua nella vasca.
ITALIANO 37 Una volta effettuati questi controlli, attivare l’apparecchiatura. Il programma riprende dal punto in cui era stato interrotto. In caso di ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. Se il display mostra altri codici di allarme. Attivare e disattivare l'apparecchiatura. In caso di ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. 13.
www.aeg.com 14. VALORI DI CONSUMO I valori indicati sono stati ottenuti in condizioni di laboratorio con standard pertinenti. I dati possono essere influenzati da diversi fattori: la quantità e il tipo di biancheria e la temperatura dell'ambiente. Anche la pressione dell'acqua, la tensione di alimentazione e la temperatura dell'acqua in ingresso possono influire sulla durata del programma di lavaggio. Le specifiche tecniche possono variare asenza preavviso al fine di migliorare la qualità del prodotto.
ITALIANO 39 15. DATI TECNICI Dimensione Larghezza/Altezza/ Profondità/Profondità totale 600 mm/ 850 mm/ 630 mm/ 660 mm Collegamento elettrico Tensione Potenza totale Fusibile Frequenza 230 V 2.
www.aeg.com Verificare il kit di impilatura compatibile controllando la profondità delle proprie apparecchiature. Il kit di installazione in colonna può essere usato solo con le apparecchiature indicate nel libretto fornito con l'accessorio. Leggere attentamente le istruzioni fornite con l'apparecchiatura e con l'accessorio. Per sollevare l'apparecchiatura; inoltre semplifica il carico e lo scarico del bucato.
ITALIANO 41 Servizio dopo vendita Morgenstrasse 131 3018 Bern Zürcherstrasse 204E 9000 St. Gallen Seetalstrasse 11 6020 Emmenbrücke Schlossstrasse 1 4133 Pratteln Comercialstrasse 19 7000 Chur Vendita pezzi di ricambio Industriestrasse 10, 5506 Mägenwil,Tel. 0848 848 111 Consulenza specialistica/Vendita Badenerstrasse 587, 8048 Zürich, Tel. 044 405 81 11 Garanzia Per ogni prodotto concediamo una garanzia di 2 anni a partire dalla data di consegna o dalla sua messa in funzione.
www.aeg.
ITALIANO 43
157006062-B-422017 www.aeg.