LB3481 USER MANUAL FR Notice d'utilisation Lave-linge
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. INSTALLATION............................................................................................................6 4. ACCESSOIRES........................................................................................................... 11 5.
FRANÇAIS 3 Sous réserve de modifications. 1. INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • • • • Cet appareil est conçu uniquement pour un usage domestique et des situations telles que : – dans des cuisines réservées aux employés dans des magasins, bureaux et autres lieux de travail ; – pour une utilisation privée, par les clients, dans des hôtels et autres lieux de séjour ; – dans les parties communes d'immeubles d'appartements, ou dans les laveries automatiques. Respectez la charge maximale de 8 kg (reportez-vous au chapitre « Tableau des programmes »).
FRANÇAIS 5 2. CONSIGNES DE SÉCURITÉ 2.1 Installation L'installation doit être confirme aux réglementations nationales en vigueur. • Retirez l'intégralité de l'emballage et les boulons de transport, y compris le joint en caoutchouc et l'entretoise en plastique. • Conservez les boulons de transport en lieu sûr. Si l'appareil doit être de nouveau déplacé, les boulons doivent être réutilisés pour maintenir le tambour en place et éviter tout dégât interne.
www.aeg.com • N'utilisez pas de rallonge si le tuyau d'alimentation est trop court. Contactez le service après-vente agréé pour remplacer le tuyau d'alimentation. • Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. • La longueur maximale du tuyau de vidange est de 400 cm. Contactez le service après-vente agréé pour obtenir d'autres longueurs de tuyaux de vidange et des rallonges. 2.
FRANÇAIS 7 7. Retirez la protection en polystyrène en bas de l'appareil. 1 3. Retirez le film interne. 2 8. Remettez l'appareil en position verticale. 4. Ouvrez le hublot et retirez la cale en polystyrène du joint du hublot, ainsi que tous les articles présents dans le tambour. 9. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. Il est possible de voir de l'eau s'écouler du tuyau d'évacuation. Cette eau provient des tests effectués sur l'appareil en usine. 5.
www.aeg.com 11. Retirez les entretoises en plastique. 12. Placez les caches en plastique, fournis dans le sachet du manuel d'utilisation, dans les trous. x4 L'appareil doit être de niveau et stable. Une mise de niveau correcte évite les vibrations, le bruit ou des déplacements de l'appareil au cours de son fonctionnement. Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déplacement de l'appareil. 3.
FRANÇAIS 9 La partie rouge dans la fenêtre « A » témoigne de ce dysfonctionnement. 45 20 O O A Dans ce cas, fermez le robinet d'arrivée d'eau et contactez le service après-vente agréé pour faire remplacer le tuyau. Assurez-vous que le tuyau d'arrivée d'eau n'est pas en position verticale. 3. Si nécessaire, desserrez la bague de serrage pour bien le positionner. 4. Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). 3.
www.aeg.com Vérifiez que l'extrémité du tuyau de vidange n'est pas plongée dans l'eau. Il pourrait y avoir un reflux d'eau sale dans l'appareil. 3. À une conduite fixe dotée d'une ventilation spéciale : insérez directement le tuyau dans la conduite d'évacuation. Reportezvous à l'illustration. L'extrémité du tuyau de vidange doit être ventilée en permanence, c'est-à-dire que le diamètre interne du conduit d’évacuation (minimum 38 mm - min.
FRANÇAIS 11 4. ACCESSOIRES 4.1 Disponible sur www.aeg.com/shop ou chez un revendeur agréé Seuls les accessoires appropriés et agréés par AEG peuvent répondre aux normes de sécurité de l'appareil. Si les pièces ne sont pas agréées, toute réclamation sera refusée. Assurez-vous de la compatibilité du kit de superposition en vérifiant la profondeur de vos appareils. Le kit de superposition peut uniquement être utilisé avec les appareils indiqués dans la brochure fournie avec l'accessoire.
www.aeg.com mesure pour la charge et le type de linge, sans consommer davantage de temps, d'énergie ou d'eau que nécessaire. • La vapeur est un moyen rapide et simple de rafraîchir les vêtements. Les programmes à la vapeur éliminent les odeurs et les plis en douceur sur les textiles secs, facilitant ainsi le repassage. L'option Vapeur Plus termine chaque cycle par une phase de vapeur douce qui détend les fibres et réduit le froissage.
FRANÇAIS 13 6. BANDEAU DE COMMANDE 6.1 Description du bandeau de commande 3 2 1 P r o g ra m m e Eco Baumwolle Pflegeleicht Fe i n w ä s c h e Wolle/S eide Dampf Anti-Allergie 2 0 m i n .
www.aeg.com 6.2 Affichage Voyant de charge maximale. Le voyant clignote lors de l'estimation de la charge de linge (consultez le paragraphe « Détection de la charge ProSense »). Voyant de charge maximale. Il clignote si la charge de linge dépasse la charge déclarée. Voyant Hublot verrouillé. Indicateur Départ différé. L'indicateur numérique peut afficher : • La durée du programme (par ex. • Le départ différé (par ex. ou ). ). • La fin du cycle ( ). • Un code d'alarme (par ex. ).
FRANÇAIS Voyant Gain de temps. Indicateur de vitesse d'essorage. Voyant Arrêt cuve pleine. Voyant Extra silence. Indicateur de température. Le voyant tionnez un lavage à froid. apparaît lorsque vous sélec- 6.3 Plaques multilingues Des plaques adhésives en différentes langues sont fournies avec l'appareil. Collez la plaque souhaitée à proximité du sélecteur de programme. Program Koge-/Kulørt Syntetisk Finvask Uld/Silke Damp Antiallergi 20 min. - 3 kg Motionstøj Vattæpper Jeans 7. MANETTES ET TOUCHES 7.
www.aeg.com Appuyez à plusieurs reprises sur cette touche jusqu'à ce que la température souhaitée s'affiche. Lorsque et s'affichent, l'appareil ne chauffe pas l'eau. 7.4 Essorage Lorsque vous sélectionnez un programme, l'appareil règle automatiquement la vitesse d'essorage maximale permise. Appuyez à plusieurs reprises sur cette touche pour : • Diminuer la vitesse d'essorage. Seules les vitesses disponibles pour le programme sélectionné s'affichent. • Activer l'option Arrêt cuve pleine.
FRANÇAIS Cette option n'est pas disponible avec des températures de lavage inférieures à 40 °C. • Prélavage Utilisez cette option pour ajouter une phase de prélavage à 30 °C avant la phase de lavage. Cette option est recommandée pour le linge très sale, tout particulièrement s'il contient du sable, de la poussière, de la boue ou d'autres particules solides. Cette option peut rallonger la durée du programme. 7.
www.aeg.com 7.10 Eco L'option Eco diminue la consommation d'énergie tout en maintenant de bons résultats de lavage. Sélectionnez cette option pour le linge légèrement ou normalement sale, lavé à 30 °C ou plus. La consommation d'eau et d'énergie peut varier en fonction de différents facteurs comme la pression, la dureté et la température de l'eau, la température ambiante, le type et la quantité de linge, les options sélectionnées, la vitesse d'essorage et les variations de tension du réseau électrique.
FRANÇAIS Programme 19 Description du programme Programme vapeur Programme vapeur pour les articles en coton et textiles Vapeur synthétiques. La vapeur peut être utilisée pour le linge sec2) Linge propre ou porté une seule fois. Ce programme réduit les plis et les odeurs3) et détend les fibres. Lorsque le programme est terminé, retirez rapidement le linge du tambour. Après un programme Vapeur, le repassage est facilité. N'utilisez aucun produit de lavage.
www.aeg.com Programme Outdoor Description du programme N'utilisez pas d'adoucissant et assurez-vous que le distributeur de produit de lavage ne contient pas de résidus d'adoucissant. Vêtements d'extérieur, de travail, de sport, imperméables et tissus perméables à l'air, vestes à molleton ou doublure isolante amovibles. La charge de linge recommandée est de 2.5 kg. Ce programme peut également être utilisé comme cycle de restauration de l'imperméabilité.
FRANÇAIS Programme Nettoyage de l'appareil 21 Description du programme Le cycle de maintenance à l'eau chaude sert à nettoyer et rafraîchir le tambour, ainsi qu'à éliminer les résidus qui pourraient entraîner la formation de mauvaises odeurs. Pour des résultats optimaux, effectuez ce cycle une fois par mois. Avant d'effectuer ce cycle, retirez tous les articles du tambour. Dans le compartiment de la phase de lavage du distributeur de produit de lavage, placez le volet du compartiment vers le haut.
www.aeg.com Programme Température par défaut Plage de températures Vitesse d'essorage de Charge maxiréférence male Plage de vitesses d'essorage 60 °C 1400 tr/min 1400 tr/min - 400 tr/min 8 kg 20 min - 3 kg 30 °C 40 °C - 30 °C 1200 tr/min 1200 tr/min - 400 tr/min 3 kg Outdoor 30 °C 40 °C - Froid 1200 tr/min 1200 tr/min - 400 tr/min Jeans 40 °C 60 °C - Froid 1200 tr/min 1200 tr/min - 400 tr/min 8 kg 60 °C 1200 tr/min 1200 tr/min - 400 tr/min - Anti-Allergies Nettoyage de l'appareil 2.
Prélavage ■ ■ ■ ■ ■ Rinçage plus ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Départ Différé ■ ■ ■ Vapeur Plus5) ■ ■ Soft Plus ■ ■ Rinçage uniquement 3) Gain de temps 4) ■ ■ ■ ■ ■ Jeans ■ Outdoor ■ 20 min - 3 kg ■ 23 Nettoyage de l'appareil Anti-Allergies Délicats ■ Vapeur Synthétiques Taches2) Laine/Soie Options Coton Programme FRANÇAIS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) Avant de sélectionner cette option, réglez un programme de lavage adapté à vos vêtements.
www.aeg.com 8.2 Woolmark Apparel Care - Bleu Le cycle Laine de cet appareil a été approuvé par la société Woolmark pour le lavage des vêtements en laine portant une étiquette « lavage à la main », sous réserve que les vêtements soient lavés conformément aux instructions du fabricant de ce lave-linge. Consultez l'étiquette d'entretien du vêtement pour plus d'instructions sur le séchage et le lavage. M1230 Le symbole Woolmark est une marque de certification dans de nombreux pays. 9. RÉGLAGES 9.
FRANÇAIS 9.5 Soft Plus Sélectionnez l'option Soft Plus pour optimiser la distribution d'assouplissant et rendre le linge plus doux. Il est recommandé lorsque vous utilisez de l'assouplissant. 25 Pour activer/désactiver cette option, appuyez simultanément sur les touches et jusqu'à ce que le voyant s'allume/s'éteigne au-dessus de l'indicateur . Cette option augmente légèrement la durée du programme. 10.
www.aeg.com Suivez toujours les instructions imprimées sur l'emballage des produits de lavage, mais nous vous recommandons de ne pas dépasser le niveau maximal indiqué ( ). Cette quantité vous garantira les meilleurs résultats de lavage. ATTENTION! Veillez à ce qu'il n'y ait pas de linge coincé entre le joint et le hublot. Cela pourrait provoquer une fuite d'eau ou endommager le linge. 11.
FRANÇAIS 4. Pour utiliser de la lessive liquide, tournez le volet vers le bas. Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet. • Ne sélectionnez pas de phase de prélavage. • Ne sélectionnez pas la fonction Départ différé. 5. Dosez le produit de lavage et l'assouplissant. 6. Fermez soigneusement le distributeur de produit de lavage. 27 11.5 Réglage d'un programme 1.
www.aeg.com L'appareil démarre le décompte du départ différé. Lorsque le décompte est terminé, le programme démarre. L'estimation de la fonction PROSENSE démarre à la fin du décompte. Annulation du départ différé au cours du décompte Pour annuler le départ différé : 1. Appuyez sur la touche Départ/Pause pour mettre l'appareil en pause. Le voyant correspondant clignote. 2. Appuyez à plusieurs reprises sur la touche Départ Différé jusqu'à ce que s'affiche. 3.
FRANÇAIS Par ex., la phase de lavage ou de prélavage est en cours : . Lorsque la phase se termine, le voyant correspondant cesse de clignoter et reste fixe. Le voyant de la phase suivante commence à clignoter. Par ex., la phase de rinçage est en cours : . Si vous sélectionnez Vapeur Plus, les voyants de la phase à la vapeur s'allument. La phase à la vapeur est en cours : .
www.aeg.com Sur l'affichage, tous les voyants de la phase de lavage sont fixes et l'affichage du temps indique . Le voyant de la touche Départ/Pause s'éteint. Le hublot se déverrouille et le voyant s'éteint. 1. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil. Cinq minutes après la fin du programme, la fonction d'économie d'énergie éteint automatiquement l'appareil. 2. 3. 4. 5. Lorsque vous rallumez l'appareil, le dernier programme sélectionné s'affiche.
FRANÇAIS 31 12. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 12.1 Chargement du linge • Séparez le linge en fonction des articles : blancs, de couleurs, synthétiques, délicats et en laine. • Respectez les instructions de lavage qui figurent sur les étiquettes des vêtements. • Ne lavez pas les articles blancs et de couleur ensemble. • Certains articles de couleurs peuvent déteindre lors des premiers lavages. Il est recommandé de les laver séparément les premières fois.
www.aeg.com • Commencez toujours un programme de lavage avec une charge de linge maximale. • Pour prétraiter les taches, vous pouvez utiliser un détachant si vous sélectionnez un programme à basse température. • Pour utiliser la bonne quantité de produit de lavage, vérifiez la dureté de l'eau de votre système domestique. Reportez-vous au chapitre « Dureté de l'eau ». recommandé d'utiliser un adoucisseur d'eau pour lave-linge.
FRANÇAIS 13.4 Joint du hublot 33 1 2 Examinez régulièrement le joint et enlevez tous les objets situés à l'intérieur. 13.5 Nettoyage du tambour Examinez régulièrement le tambour pour éviter la formation de rouille. 2. Retirez la partie supérieure du compartiment réservé à l'additif pour faciliter le lavage, et passez-le sous l'eau courante chaude pour éliminer toute trace d'accumulation de lessive. Après le nettoyage, remettez la partie supérieure en place. Pour un nettoyage complet : 1.
www.aeg.com 2 1 13.7 Nettoyage de la pompe de vidange AVERTISSEMENT! Débranchez la fiche d'alimentation de la prise secteur. 2. Placez un récipient sous le logement de la pompe de vidange pour recueillir l'eau qui s'écoule. 3. Ouvrez la goulotte vers le bas. Gardez toujours un chiffon à portée de main pour essuyer l'eau qui peut s'écouler lorsque vous retirez le filtre. Vérifiez régulièrement le filtre de la pompe de vidange et assurez-vous qu'il est propre.
FRANÇAIS 7. Tournez le filtre vers la fauche pour le retirer. 35 2 1 1 2 12. Fermez le couvercle de la pompe. 8. Si nécessaire, retirez les peluches et objets du logement du filtre. 9. Assurez-vous que la pale de la pompe peut tourner. Si ce n'est pas le cas, contactez votre service aprèsvente. 2 1 10. Nettoyez le filtre sous l'eau courante. Lorsque vous vidangez l'eau avec la vidange d'urgence, vous devez réactiver le système de vidange : a.
www.aeg.com 1 2 45° 3 20° 2. Retirez le tuyau d'arrivée de l'appareil en desserrant la bague de serrage. 13.9 Vidange d'urgence Si l'appareil ne peut pas vidanger l'eau, effectuez la même procédure décrite dans le paragraphe « Nettoyage de la pompe de vidange ». Si nécessaire, nettoyez la pompe. Lorsque vous vidangez l'eau avec la vidange d'urgence, vous devez réactiver le système de vidange : 3. Utilisez une brosse à dents pour nettoyer le filtre de la valve situé à l'arrière de l'appareil. 1.
FRANÇAIS 37 AVERTISSEMENT! Assurez-vous que la température est supérieure à 0 °C avant d'utiliser à nouveau l'appareil. Le fabricant ne pourra être tenu pour responsable en cas de dommages dus aux basses températures. 14. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 14.1 Introduction L'appareil ne démarre pas ou s'arrête en cours de programme. Dans un premier temps, essayez de trouver une solution au problème (reportez-vous au tableau).
www.aeg.com 14.2 Pannes possibles Problème Le programme ne démarre pas. Solution possible • Assurez-vous que la fiche du câble d'alimentation est bien insérée dans la prise de courant. • Vérifiez que le hublot de l'appareil est fermé. • Assurez-vous qu'aucun fusible n'est grillé dans la boîte à fusibles. • Vérifiez que vous avez bien appuyé sur la touche Départ/ Pause. • Si vous avez sélectionné un départ différé, annulez-le ou attendez la fin du décompte.
FRANÇAIS 39 Problème Solution possible Il y a de l'eau sur le sol. • Assurez-vous que les raccords des tuyaux d'eau sont bien serrés et qu'il n'y a aucune fuite d'eau. • Assurez-vous que le tuyau d'arrivée d'eau et le tuyau de vidange ne sont pas endommagés. • Assurez-vous d'utiliser une lessive adaptée en quantité correcte. • Vérifiez si vous avez sélectionné un programme de lavage se terminant avec de l'eau dans la cuve. • Assurez-vous que le programme de lavage est terminé.
www.aeg.com 14.3 Ouverture d'urgence du hublot En cas de panne d'alimentation ou d'anomalie de l'appareil, le hublot reste verrouillé. Le programme de lavage continue dès que l'alimentation est rétablie. Si le hublot reste verrouillé en cas d'anomalie, il est possible de l'ouvrir à l'aide du dispositif de déverrouillage d'urgence. Avant d'ouvrir le hublot : Pour ouvrir le hublot, procédez comme suit : 1. Appuyez sur la touche Marche/Arrêt pour éteindre l'appareil. 2.
FRANÇAIS 41 Au cours du programme de lavage, la technologie Prosense peut faire varier la durée du lavage et les valeurs de consommation. Pour plus de détails, consultez le paragraphe« La détection de charge Prosense » du chapitre « Utilisation quotidienne ». Programmes Charge (kg) Consommation énergétique (kWh) Coton 60 °C 8 1.65 80 200 52 Coton 40 °C 8 1.25 80 200 52 Synthétiques 40 °C 4 0.78 55 130 35 Délicats 40 °C 4 0.60 63 91 35 1.5 0.
www.aeg.
FRANÇAIS 43 17.2 Nettoyage du filtre de la pompe de vidange 1 2 3 180˚ 1 2 Nettoyez régulièrement le filtre, tout particulièrement si le code d'alarme s'affiche. 17.3 Programmes Programmes Coton Coton Synthétiques Délicats Laine/Soie Vapeur Anti-Allergies 20 min - 3 kg Charge 8 kg Coton blanc et couleurs. 8 kg Coton blanc et couleurs. Programmes standard pour les valeurs de consommation de l'étiquette énergétique. 4 kg Articles en textiles synthétiques ou mixtes.
www.aeg.com Programmes Charge - Nettoyage de l'appareil Description de l'appareil Cycle d'entretien pour le nettoyage du tambour. 1) Programme de lavage. 2) Programme de lavage et phase d'imperméabilisation. 18.
FRANÇAIS Le « programme standard pour le coton à 60 °C » et le « programme standard pour le coton à 40 °C » sont les programmes de lavage standard utilisés pour les informations de l'étiquette énergétique et de la fiche produit. lls sont adaptés au nettoyage du linge en coton normalement sale et sont les programmes les plus efficaces en termes de consommation d'eau et d'énergie.
www.aeg.com Garantie Nous octroyons sur chaque produit 2 ans de garantie à partir de la date de livraison ou de la mise en service au consommateur (documenté au moyen d’une facture, d’un bon de garantie ou d’un justificatif d’achat). Notre garantie couvre les frais de mains d’œuvres et de déplacement, ainsi que les pièces de rechange.
FRANÇAIS 47
157006323-A-382018 www.aeg.