LM85480F LFL86804 EN User Manual
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 5 4. CONTROL PANEL...........................................................................................................6 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. 2.
ENGLISH 2.4 Use appliance. Contact the Authorised Service Centre to ensure which accessories can be used. • Do not touch the glass of the door while a programme operates. The glass can be hot. WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
www.aeg.com 3.3 Multilingual badges and knob 3.4 Fixing plate kit (4055171146) To install the multilingual badge and the knob, follow the instructions given in the installation leaflet, supplied with the relevant kit. Available from your authorized dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. Read carefully the instructions supplied with the kit. 4. CONTROL PANEL 4.
ENGLISH 4.2 Display A B C D L E K F G J H I The display shows: Temperature of the set programme A Cold water Spin speed of the set programme B No Spin symbol1) Rinse hold symbol 1) Only available for SPIN/DRAIN programme. The phase symbols When a programme is set, all the symbols of the phases related to the programme come on. When the programme starts, only the symbol of the phase in operation flashes. When the programme is completed, the symbol of the last phase is on.
www.aeg.com You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off. F If the programme is completed but the symbol stays on: • The «Rinse hold» function is on. • There is water in the drum. The delay start symbol comes on when you set the delay start function. G Programme time When the programme starts, the programme time decreases with steps of 1 minute.
ENGLISH 9 The extra rinse symbol comes on when this function is activated. K The value shows the total number of the rinses. The indicator bar is fully filled when you set the maximum number of rinses. the Stain symbol comes on when you activate the function. The Prewash symbol comes on when this function is activated. L The indicator bar is not fully filled when you set only one of the functions. The indicator bar is fully filled when you set the two functions. 5.
www.aeg.com Programme Temperature range Duvet 60°C - 30° C Anti-Allergy 60° C Spin/Drain3) Rinse 4) Cold Jeans 60° - Cold 20 min.-3Kg 40°C - 30°C Super Eco Cold Cottons Eco6) 60°C - 40° C Maximum load Maximum spin speed Programme description (Type of load and soil level) 3 kg 800 rpm Special programme for one synthetic blanket, duvet, bedspread and so on. 8 kg 1400 White cotton items. This programme removes micro-organisms thanks to the washing by 60°C and adds one rinse.
ENGLISH Programme Temperature range Maximum load Maximum spin speed 11 Programme description (Type of load and soil level) Steam programmes7) Steam can be used for dried, washed or worn once laundry. These programmes can reduce creases and odours and make your laundry more soft. Do not use any detergent. If necessary, remove stains by washing or using localized stain removal. Steam programmes do not perform any hygienic cycle.
www.aeg.com Programme options compatibility Programme Cottons Stain/ Extra Prewash 1) Rinse 2) ■ ■ Extra Silent Synthetics Easy Iron Delicates Wool/Silk Duvet Anti-Allergy Spin/Drain5) Rinse Jeans 20 min.
ENGLISH Programme Cottons Eco Stain/ Extra Prewash 1) Rinse 2) ■ ■ ■ ■ 13 Time Save 3) Delay Start ■ 6) ■ 1) If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a temperature lower then 40°C. 2) With a low spin speed the appliance performs delicate rinses and a short spin. 3) If you set a shorter duration, we recommend that you decrease the quantity of the load. It is possible to load fully the appliance, however the washing results are reduced.
www.aeg.com Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Remaining moisture (%) 1) Cottons 60 °C 8 1.5 66 179 52 Cottons 40 °C 8 0.9 66 175 52 Synthetics 40 °C 4 0.6 48 110 35 Delicates 40 °C 4 0.7 58 91 35 Wool/Silk 30 °C 2 0.35 57 60 30 Standard cotton programmes Standard 60 °C cotton 8 0.89 55 225 52 Standard 60 °C cotton 4 0.74 40 190 52 Standard 40 °C cotton 4 0.
ENGLISH 15 8.5 Stain/Prewash 8.6 Spin Press this button to add the stain and/or a prewash phase to a programme. Press this button to: • Decrease the maximum speed of the spin phase of the programme. Press the button again and again to activate one or two options. The related symbol and the indicator bar comes on in the display. • Stain: Use this option for laundry with hard stains to remove.
www.aeg.com 10. BEFORE FIRST USE 1. Put 2 litre of water in the detergent compartment for washing phase. This activates the drain system. 2. Put a small quantity of detergent in the compartment for washing phase. 3. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. 11. DAILY USE WARNING! Refer to Safety chapters. 11.3 Filling the detergent and additives 11.1 Activating the appliance 1. Open the water tap. 2.
ENGLISH 1 2 3. To use powder detergent, turn the flap up. A 17 With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit showed in the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. 11.5 Setting a programme 4.
www.aeg.com 11.7 Starting a programme with the delay start 1. Press button Delay Start again and again until the display shows the number of minutes or hours of delay. The related indicator comes on. 2. Press button Start/Pause. The appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button Start/ Pause to start the appliance, you can cancel or change the set of the delay start. 11.
ENGLISH 2. 3. 4. 5. When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. Remove the laundry from the appliance. Make sure that the drum is empty. Keep the door ajar, to prevent mildew and odours Close the water tap. 11.14 Draining water out after end of cycle The washing programme is completed, but there is water in the drum: The drum turns regularly to prevent the creases in the laundry.
www.aeg.com 12.2 Stubborn stains For some stains, water and detergent is not sufficient. We recommend that you remove these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. 12.
ENGLISH 21 the drum. Make regularly a maintenance wash. To do this: Regularly examine the seal and remove all objects from the inner part. • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent. 13.5 Cleaning the drum Regularly examine the drum to prevent limescale and rust particles. Only use special products to remove rust particles from the drum. 13.4 Door seal We suggest you to: 1.
www.aeg.com 1. 2. 2 1 1 2 1 3. 4. 1 5. 6. 1 7. 2 2 8.
ENGLISH 23 9. 2 1 13.8 Cleaning the inlet hose and the valve filter 1. 2. 1 2 3 3. 4. 45° 20° 13.9 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1.
www.aeg.com 13.10 Frost precautions If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 4. Empty the drain pump. Refer to the emergency drain procedure. 5. When the drain pump is empty, install the inlet hose again. WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 1.
ENGLISH Problem 25 Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter of the inlet hose and the filter of the valve are not clogged. Refer to “Care and cleaning”. Make sure that the inlet hose has no kinks or bends. Make sure that the connection of the water inlet hose is correct. The appliance does not fill with water and drain immediately.
www.aeg.com Problem Possible solution Set the drain or the spin programme if there is water in the drum. Make sure that the appliance receives electrical power. This problem may be caused by a failure of the appliance. Contact the Authorised Service Centre. If you need to open the door, please read carefully «Emergency door opening». The appliance makes an unusual noise. Make sure the levelling of the appliance is correct. Refer to 'Installation'.
ENGLISH 27 3. Open the filter flap. 4. Keep the emergency unlock trigger pulled downward and, at the same time, open the appliance door. CAUTION! Make sure that the drum is not rotating. Wait till the drum stops rotating, if necessary. Make sure that the water level inside the drum is not too high. Proceed with an emergency drain, if necessary (refer to «Emergency drain» in «Care and cleaning» chapter). To open the door, proceed as follows: 1. Press the button Auto Off to switch the appliance off. 2.
132907031-A-242014 www.aeg.
