LM75670F EN User Manual
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 5 4. CONTROL PANEL...........................................................................................................6 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. 2.
ENGLISH 2.4 Use appliance. Contact the Authorised Service Centre to ensure which accessories can be used. • Do not touch the glass of the door while a programme operates. The glass can be hot. WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
www.aeg.com 3.3 Fixing plate kit (4055171146) installation leaflet, supplied with the relevant kit. Available from your authorized dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. Read carefully the instructions supplied with the kit. 3.4 Multilingual badges and knob To install the multilingual badge and the knob, follow the instructions given in the 4. CONTROL PANEL 4.
ENGLISH 4.2 Display A B C D Temperature area: Temperature indicator A Cold water indicator. Spin area: Spin speed indicator B No Spin indicator1) Rinse Hold indicator 1) Only available for Spin/Drain programme. Display indicators: Washing phase Rinses phase Spin phase C Child safety lock Door locked You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off.
www.aeg.com Time area: Programme duration Delay start D Alarm codes Message of error Programme is completed 5. PROGRAMMES 5.1 Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Washing programmes Cottons 95°C - Cold Cottons + Prewash 95°C - Cold 7 kg 1600 rpm White cotton and coloured cotton. Normal soil and light soil. 7 kg 1600 rpm White cotton and coloured cotton. Heavy soil and normal soil.
ENGLISH Programme Temperature range Delicates 40°C - Cold Wool/Silk 40°C - Cold Spin/Drain3) Rinse Curtains 40°C - Cold Jeans 60°C - Cold Quick Intensive 60°C - 40°C 20 min.-3Kg 40°C - 30°C Super Eco Cold 9 Maximum load Maximum spin speed Programme description (Type of load and soil level) 3.5 kg 1200 rpm Delicate fabrics as acrylics, viscose, polyester items. Normal soil. 2 kg 1200 rpm Machine washable wool, hand washable wool and delicate fabrics with «hand washing» care symbol.
www.aeg.com Programme Temperature range Cottons Eco6) Maximum load Maximum spin speed Programme description (Type of load and soil level) 7 kg 1600 rpm White cotton and colour-fast cotton. Normal soil. The energy consumption decreases and the time of the washing programme is extended. 60°C - 40°C 1) To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft wash and spin phase. The appliance adds some rinses.
ENGLISH Programme 1) 20 min.-3Kg ■ Super Eco ■ ■ Cottons Eco ■ ■ 2) 3) ■ ■ ■ ■ ■ ■ ■ 4) 1) The Stain option is not available with a temperature lower then 40°C. 2) If you set Extra Rinse option, the appliance adds some additional rinses. In the Rinse programme, if you set a low spin speed the appliance performs delicate rinses and a short spin. 3) If you set a shorter duration, we recommend that you decrease the quantity of the load.
www.aeg.com Programmes Load (kg) Energy con- Water consumption sumption (kWh) (litre) ApproxiRemaining mate promoisture gramme du- (%) 1) ration (minutes) Standard 60 °C cotton 3.5 0.66 35 205 44 Standard 40 °C cotton 3.5 0.54 35 209 44 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0,48 0,48 The information given in the chart above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. 7. SETTINGS 7.
ENGLISH 8.3 8.7 With this option you can delay the start of a programme from 30 minutes to 20 hours. With this option you can decrease the default spin speed. 13 The display shows the related indicator. The display shows the indicator of the set speed. 8.4 Additional spin options: No Spin With this option you can decrease the programme duration. • Press this button one time to set 'Shortened duration' for items with daily soil.
www.aeg.com 10. DAILY USE 10.1 Activating the appliance 1. Open the water tap. 2. Connect the mains plug to the mains socket. 10.3 Filling the detergent and additives 3. Press button to activate the appliance. A short tune sounds. 10.2 Loading the laundry 1. Open the appliance door 2. Put the laundry in the drum, one item at a time. 3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. 4. Close the door.
ENGLISH 3. To use powder detergent, turn the flap up. A • The related programme indicator comes on. flashes. • The indicator of • The display shows: the default temperature, the spin speed, the indicators of the programme phases and the programme duration. 2. If necessary, change the temperature, the spin speed, the cycle duration, or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message Err. 4.
www.aeg.com 10.8 Starting a programme with the delay start 1. Press button again and again until the display shows the number of minutes or hours of delay. The related indicator comes on. 2. Press button . The appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button to start the appliance, you can cancel or change the set of the delay start. 10.
ENGLISH 10.14 Draining water out after end of cycle The washing programme is completed, but there is water in the drum: The drum turns regularly to prevent the creases in the laundry. The door lock indicator door stays locked. is on. The The appliance drains and spins automatically after approximately18 hours. 10.
www.aeg.com • • • • • – powder detergents for delicate fabrics (40 °C max) and woollens, – liquid detergents, preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special for woollens only. Do not mix different types of detergents. To help the environment, do not use more than the correct quantity of detergent. Obey the instructions that you find on the on packaging of these products.
ENGLISH 12.4 Door seal 19 Regularly examine the seal and remove all objects from the inner part. 12.5 Cleaning the detergent dispenser 1. 2. 1 2 3. 4. 12.6 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot.
www.aeg.com 1. 2. 2 1 1 2 1 3. 4. 1 5. 6. 1 7. 2 2 8.
ENGLISH 21 9. 2 1 12.7 Cleaning the inlet hose and the valve filter 1. 2. 1 2 3 3. 4. 45° 20° 12.8 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1.
www.aeg.com 12.9 Frost precautions If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 4. Empty the drain pump. Refer to the emergency drain procedure. 5. When the drain pump is empty, install the inlet hose again. WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 1.
ENGLISH Problem 23 Possible solution Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter of the inlet hose and the filter of the valve are not clogged. Refer to “Care and cleaning”. Make sure that the inlet hose has no kinks or bends. Make sure that the connection of the water inlet hose is correct. The appliance does not fill with water and drain immediately.
www.aeg.com Problem Possible solution Set the drain or the spin programme if there is water in the drum. Make sure that the appliance receives electrical power. This problem may be caused by a failure of the appliance. Contact the Authorised Service Centre. The appliance makes an unusual noise. Make sure the levelling of the appliance is correct. Refer to 'Installation'. Make sure that the packaging and/or the transit bolts are removed. Refer to 'Installation'. Add more laundry in the drum.
ENGLISH Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Minimum Maximum Cold water Water supply 1) Maximum Load Cotton 7 kg Spin Speed Maximum 1600 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 15. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol .
www.aeg.
ENGLISH 27
132907000-A-072014 www.aeg.
