User manual

10.8 Starting a programme
with the delay start
1. Press button again and again until
the display shows the number of
minutes or hours of delay.
The related indicator comes on.
2. Press button .
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
to start the appliance, you can
cancel or change the set of
the delay start.
10.9 Cancelling the delay start
To cancel the delay start:
1. Press button to set the appliance
to pause.
The related indicator flashes.
2. Press button repeatedly until the
display shows
.
3. Press button again to start the
programme immediately.
10.10 Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1. Press button .
The related indicator flashes.
2. Change the function set.
3. Press the button again.
The programme continues.
10.11 Cancelling a programme
1. Press button to cancel the
programme and to deactivate the
appliance.
2. Press button
again to activate the
appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in
the detergent compartment, if
not fill the detergent again.
10.12 Opening the door
If the temperature and level of
the water in the drum are too
high and the drum still rotates
you cannot open the door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press button .
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press button .
The programme or the delay start
continues.
10.13 End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display comes on and the door
locked indicator goes off.
The indicator of
button goes off.
1. Press button to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a new
cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door ajar, to prevent
mildew and odours
5. Close the water tap.
www.aeg.com
16