LP1481F EN DE USER MANUAL User Manual Washing Machine Benutzerinformation Waschmaschine 2 38
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 3 2. SAFETY INSTRUCTIONS.............................................................................................5 3. INSTALLATION............................................................................................................6 4. ACCESSORIES........................................................................................................... 11 5.
ENGLISH 3 Subject to change without notice. 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • • • • • • This appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops, offices and other working environments; – by clients in hotels, motels, bed & breakfast and other residential type environments; – areas for communal use in blocks of flats or in launderettes. Do not exceed the maximum load of 8 kg (refer to the "Programme chart" chapter).
ENGLISH 5 2. SAFETY INSTRUCTIONS 2.1 Installation The installation must comply with relevant national regulations. • Remove all the packaging and the transit bolts including rubber bush with plastic spacer. • Keep the transit bolts in a safe place. If the appliance is to be moved in the future they must be reattached to lock the drum to prevent an internal damage. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
www.aeg.com • You can extend the drain hose to maximum 400 cm. Contact the Authorised Service Centre for the other drain hose and the extension. 2.4 Use WARNING! Risk of injury, electric shock, fire, burns or damage to the appliance. • Follow the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Make sure that all metal objects are removed from the laundry.
ENGLISH 7 3. Remove the cardboard top and the polystyrene packaging materials. 1 2 4. Open the door and remove the polystyrene piece from the door seal and all the items from the drum. 5. Put the front polystyrene packaging element on the floor behind the appliance. 6. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses. 7. Remove the polystyrene protection from the bottom. 8. Pull up the appliance in vertical position. 9.
www.aeg.com 11. Pull out the plastic spacers. 12. Put the plastic caps, that you find in the user manual bag, in the holes. x4 The appliance must be level and stable. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 3.2 Positioning and levelling 1. Install the appliance on a flat hard floor.
ENGLISH 9 45º 20º A If this occurs, close the water tap and contact the authorized service centre to replace the hose. 3.5 Water drainage Make sure that the inlet hose is not in vertical position. 3. If necessary, loose the ring nut to set it in the correct position. 4. Connect the water inlet hose to the cold water tap with 3/4" thread. The drain hose should be positioned at a height of not less than 60 cm and not more than 100 cm from the floor. You can extend the drain hose to maximum 400 cm.
www.aeg.com Make sure that the drain hose end is not immersed in the water. There may be a return of dirty water into the appliance. 3. To a stand pipe with vent-hole Insert the drain hose directly into a drain pipe. Refer to the illustration. The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm min. 1.5") must be larger than the external diameter of the drain hose. 4.
ENGLISH 11 4. ACCESSORIES 4.1 Available in www.aeg.com/shop or from authorised dealer Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 4.2 Fixing plate kit (4055171146) Available from your authorised dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates.
www.aeg.com 5.2 Appliance overview 1 2 9 8 3 10 4 5 11 12 6 7 1 2 3 4 5 6 7 Worktop Detergent dispenser Control panel Door handle Rating plate Drain pump filter Feet for levelling the appliance 8 9 10 11 12 Drain hose Inlet hose connection Mains cable Transit bolts Hose support 6. CONTROL PANEL 6.1 Control panel description 2 1 3 Programme Baumwolle Baumwolle Eco Pflegeleicht Feinwäsche Wolle/Seide 20 Min.
ENGLISH 1 Programme dial 2 Display 3 Delay Start touch button 4 Time Save 7 Spin • Prewash reduction touch button option option • Rinse Hold 8 Temperature touch button 9 On/Off push button touch button touch button • Stain option • No Spin touch button 5 Start/Pause 6 Option • Only rinse 13 option option 6.2 Display A B A C D E The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. or ). ). • Cycle end ( ). • Warning code ( ). B Extra rinse indicator.
www.aeg.com Progra m ulørt Koge-/K sk Synteti k Finvas ke Uld/Sil Damp ergi iall Ant . - 3 kg 20 min støj Motion per Vattæp Jeans 7. DIAL AND BUTTONS 7.1 On/Off Pressing this button for a few seconds allows to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off. The indicator = cold water of the set temperature comes on (the appliance does not heat the water). 7.
ENGLISH The spin speed can be reduce. draining phases of the selected programme. The relevant indicator comes on. 7.5 Option 7.6 Delay Start Press this button repeatedly to activate one of the available options. With this option you can delay the start of a programme in a more convenient time. • Stain Select this option to add an anti-stain phase to a programme in order to treat heavily soiled or stained laundry with stain remover. Pour the stain remover into compartment .
www.aeg.com Programme Cotton Eco Programme description White cotton and coloured cotton. Normal, heavy and light soil. Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, the programme Cottons at 60 °C and the programme Cottons at 40 °C with the option are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme».
ENGLISH 17 Programme Programme description Drain/Spin To spin the laundry and to drain the water in the drum. All fabrics, except woollens and delicate fabrics. 1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or doesn't rotate properly, but this is normal for this programme. 2) This programme is for daily use and has the lowest energy and water consumption whilst maintaining a good washing performance.
www.aeg.com Cotton Eco Synthetics Delicates Wool/Silk 20 min. - 3 kg Cotton 20° Machine Clean Drain/Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Stain 1) ■ ■ ■ ■ Prewash ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Time Save2) ■ ■ ■ ■ ■ Delay Start ■ ■ ■ ■ Options Spin Duvet Cottons Programme Programme options compatibility ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) This option is not available with temperature lower than 40 °C.
ENGLISH You can activate this option: • After you touch the Start/Pause button: all the buttons and the programme dial are deactivated (except On/Off button ). • Before you touch the Start/Pause button: the appliance cannot start. The appliance keeps the selection of this option after you switch it off. 9.2 Acoustic signals 19 If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. 9.
www.aeg.com 11.3 Filling the detergent and additives 1 2 3. To use powder detergent, turn the flap up. Compartment for prewash phase, soak programme or stain remover. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives. Flap for powder or liquid detergent.
ENGLISH With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit shown on the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. 21 11.6 Starting a programme with the delay start Touch the Start/Pause button. The appliance starts the countdown of the delay start.
www.aeg.com 11.8 The ProSense load detection After touching the Start/Pause button the ProSense technology starts the laundry load detection: 1. The appliance detects the load within a few minutes, the indicator blink, the drum rotates shortly. 2. At the end of the load detection, the indicator goes off . About 20 minutes after the programme start, the programme duration could be adjusted depending on the capacity of water absorption of the fabrics.
ENGLISH After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. 2. 3. 4. 5. When you activate the appliance again, the display show the end of the last selected programme. Turn the programme dial to set a new cycle. Remove the laundry from the appliance. Make sure that the drum is empty. Keep the door and the detergent dispenser slightly ajar to prevent mildew and odours. Close the water tap. 11.
www.aeg.com • Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, etc. ). • A very small load can cause balance problems with the spin phase leading to excessive vibration. If this occurs: a. interrupt the programme and open the door (refer to "Daily Use" chapter); b. manually redistribute the load so that the items are spaced evenly around the tub; c. press the Start/Pause button. The spin phase continues.
ENGLISH 25 13. CARE AND CLEANING WARNING! Refer to Safety chapters. 13.4 Door seal 13.1 External cleaning Clean the appliance with mild soap and warm water only. Fully dry all the surfaces. CAUTION! Do not use alcohol, solvents or chemical products. CAUTION! Do not clean the metal surfaces with chlorine-based detergent. 13.2 Descaling If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines.
www.aeg.com 1 2 2. Remove the top part of the additive compartment to aid cleaning and flush it out under running warm water, to remove any traces of accumulated detergent. After cleaning, replace the top part in its position. 13.7 Cleaning the drain pump WARNING! Disconnect the mains plug from the mains socket. Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn.
ENGLISH 27 6. Repeat the steps 4 and 5 until the water stops to flow out. 7. Turn the filter anti-clockwise to remove it. 2 1 2. Place a suitable bowl below the drain pump access to collect the water that flows out. 3. Open the chute downwards. Always keep a rag nearby to dry up any water spillages when removing the filter. 4. Turn the filter 180 degrees in anticlockwise direction to open it, without removing. Let the water flow out. 5.
www.aeg.com 2 1 3. Clean the valve filter on the back of the appliance with a toothbrush. 12. Close the pump cover. 2 1 13.8 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 4. When you reconnect the hose to the back of the appliance, turn it left or right (not in vertical position) depending on the position of your water tap. 1.
ENGLISH values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 29 5. When the drain pump is empty, install the inlet hose again. WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3.
www.aeg.com 14.2 Possible failures Problem Possible solution The programme does not start. • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. • Make sure that the Start/Pause has been touched. • If the delay start is set, cancel the setting or wait for the end of countdown. • Deactivate the Child Lock function if it is on. The appliance does not fill with water properly.
ENGLISH 31 Problem Possible solution You cannot open the appliance door. • Make sure that a washing programme that ends with water in tub, has been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the drum. • Make sure that the appliance receives electrical power. • This problem may be caused by a failure of the appliance. Contact the Authorised Service Centre.
www.aeg.com 15. CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant standards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing programme duration. Technical specifications may be changed without prior notice to improve the quality of product.
ENGLISH 33 16. TECHNICAL DATA Dimension Width/ Height/ Depth/ Total depth 600 mm/ 850 mm/ 571 mm/ 600 mm Electrical connection Voltage Overall power Fuse Frequency 230 V 2200 W 10 A 50 Hz Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure 0.5 bar (0.05 MPa) 8 bar (0.
www.aeg.com 17.2 Cleaning the drain pump filter 1 2 3 180˚ 1 2 Clean the filter regularly and, especially, if the alarm code display. appears on the 17.3 Programmes Programmes Load Product description 8 kg White cotton and coloured cotton. 8 kg White cotton and coloured cotton. Standard programmes for the Energy Label consumption values. Synthetics 3 kg Synthetic items or mixed fabric items. Delicates 3 kg Delicate fabrics such as acrylics, viscose, polyester items.
ENGLISH Trade Mark Model Rated capacity in kg Energy efficiency class AEG LP1481F, PNC914913453 8 A+++ -20% Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
www.aeg.com Airborne acoustical noise emission in db(A) washing 50 Airborne acoustical noise emission in db(A) spinning 74 Built in appliance Y/N No The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC . 19. CH GUARANTEE Customer Service Centres Point of Service Industriestrasse 10 5506 Mägenwil Le Trési 6 1028 Préverenges Via Violino 11 6928 Manno Morgenstrasse 131 3018 Bern Langgasse 10 9008 St.
ENGLISH For Switzerland: Where should you take your old equipment? Anywhere that sells new equipment or hand it in to official SENS collection points or official SENS recycling firms. The list of official SENS collection points can be found at www.erecycling.
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE........................................................................................... 39 2. SICHERHEITSANWEISUNGEN.................................................................................41 3. MONTAGE................................................................................................................. 43 4. ZUBEHÖR.................................................................................................................
DEUTSCH 39 Änderungen vorbehalten. 1. SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • • Falls Ihr Gerät mit einer Kindersicherung ausgestattet ist, empfehlen wir, diese einzuschalten. Kinder dürfen keine Reinigung und Wartung ohne Beaufsichtigung durchführen. 1.2 Allgemeine Sicherheit • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH • • • 41 Reinigen Sie das Gerät nicht mit einem Wasser- und/ oder Dampfstrahl. Reinigen Sie das Gerät mit einem feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger. Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände. Wird ein Wäschetrockner auf die Waschmaschine gestellt, muss der geeignete, von AEG zugelassene Bausatz Wasch-Trocken-Säule verwendet werden (siehe Abschnitt „Zubehör - Bausatz Wasch-TrockenSäule“). 2.
www.aeg.com • Schließen Sie das Gerät nur an eine ordnungsgemäß installierte Schutzkontaktsteckdose an. • Stellen Sie sicher, dass die Daten auf dem Typenschild mit den elektrischen Nennwerten der Netzspannung übereinstimmen. • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen.
DEUTSCH • Schneiden Sie das Netzkabel in der Nähe des Geräts ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in der Trommel einschließen. 43 • Entsorgen Sie das Gerät nach den lokalen Vorschriften zur Rücknahme und Entsorgung von Elektroaltgeräten (WEEE). 3. MONTAGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 3.1 Auspacken WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben.
www.aeg.com 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. 1 2 8. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 9. Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen. Aus dem Ablaufschlauch könnte Wasser austreten. Dies ist auf den Gerätetest mit Wasser im Werk zurückzuführen. 10. Lösen Sie die drei Schrauben mit dem mitgelieferten Schraubenschlüssel. 11. Ziehen Sie die KunststoffAbstandshalter heraus. 12.
DEUTSCH WARNUNG! Schieben Sie weder Karton noch Holz oder ähnliche Materialien unter die Stellfüße, um das Gerät auszurichten. 3.3 Wasserzulaufschlauch 1. Schließen Sie den Wasserzulaufschlauch an der Rückseite der Maschine an. 2. Drehen Sie ihn nach links oder rechts, je nach Position des Wasserhahns. 45º 20º x4 Das Gerät muss einen waagerechten und festen Stand haben.
www.aeg.com Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist. Wenden Sie sich an den Kundendienst, um einen anderen Zulaufschlauch zu erhalten. 3.4 Aquastop-Vorrichtung Der Zulaufschlauch verfügt über eine Aquastop-Vorrichtung. Diese Vorrichtung verhindert Wasserlecks am Schlauch, die durch natürliche Alterung auftreten können. 2. Am Rande eines Beckens Befestigen Sie die Führung am Wasserhahn oder an der Wand.
DEUTSCH Das Ende des Ablaufschlauchs muss stets belüftet sein, d. h. der Innendurchmesser des Ablaufrohrs (min. 38 mm min. 1,5") muss größer sein als der Außendurchmesser des Ablaufschlauchs. 4. Sieht das Ende des Ablaufschlauchs wie in der Abbildung gezeigt aus, können Sie es direkt in das Standrohr drücken. 47 Stellen Sie sicher, dass der Ablaufschlauch einen Bogen beschreibt, damit keine Partikel aus dem Becken in das Gerät gelangen können. 6.
www.aeg.com 4.3 Bausatz Wasch-TrockenSäule Säule auf der Waschmaschine montiert werden. Messen Sie die Tiefe Ihrer Geräte, um sich zu vergewissern, dass der Bausatz mit Ihren Geräten kompatibel ist. Der Bausatz Wasch-Trocken-Säule kann nur mit den in der mit dem Zubehör mitgelieferten Broschüre aufgeführten Geräten verwendet werden. Lesen Sie die dem Gerät und dem Zubehör beiliegenden Anleitungen sorgfältig durch. WARNUNG! Stellen Sie den Wäschetrockner nicht unter die Waschmaschine.
DEUTSCH 1 2 3 4 5 6 7 Arbeitsplatte Waschmittelschublade Bedienfeld Türgriff Typenschild Sieb der Ablaufpumpe Füße für die Ausrichtung des Geräts 8 9 10 11 12 49 Ablaufschlauch Anschluss des Zulaufschlauchs Netzkabel Transportschrauben Schlauchhalter 6. BEDIENFELD 6.1 Bedienfeldbeschreibung 2 1 3 Programme Baumwolle Baumwolle Eco Pflegeleicht Feinwäsche Wolle/Seide 20 Min.
www.aeg.com 6.2 Display A B A C D E Die Digitalanzeige zeigt Folgendes an: ). • Programmdauer (z. B. • Zeitvorwahl (z. B. oder ). • Programmende ( ). • Fehlercode ( ). B Anzeige Extra Spülen Leuchtet, wenn diese Option ausgewählt ist. C Die Anzeige schemenge. D Kindersicherungsanzeige. E Türverriegelungsanzeige. blinkt während der Messung der Wä- 6.3 Mehrsprachige Aufkleber Mit dem Gerät werden Aufkleber in verschiedenen Sprachen geliefert.
DEUTSCH Fällen den Stromverbrauch zu verringern, müssen Sie es möglicherweise erneut einschalten. Siehe Abschnitt Standby im Kapitel „Täglicher Gebrauch“. 7.2 Einführung Die Optionen/Funktionen lassen sich nicht zusammen mit allen Waschprogrammen auswählen. Prüfen Sie die Kompatibilität der Optionen/Funktionen mit den Waschprogrammen in der „Programmübersicht“. Eine Option/Funktion kann eine andere ausschließen.
www.aeg.com Vorwaschgang bei 30 °C durchzuführen. Diese Option eignet sich für stark verschmutzte Wäsche, besonders wenn diese Sand, Staub, Dreck und andere feste Partikel enthält. Mit dieser Option kann sich die Programmdauer verlängern. • Nur Spülen Das Gerät führt nur den Spül-, Schleuder- und Abpumpgang des ausgewählten Programms durch. Die entsprechende Kontrolllampe leuchtet auf. 7.6 Zeitvorwahl Mit dieser Option können Sie den Programmstart verzögern, um eine günstigere Zeit zu nutzen.
DEUTSCH 53 Programm Programmbeschreibung Baumwolle Eco Weiße und bunte Baumwollwäsche. Normal, stark und leicht verschmutzt. Standardprogramme für die auf dem Energielabel angegebenen Verbrauchswerte. Das Programm Baumwolle bei 60 °C und das Programm Baumwolle bei 40 °C mit der Option sind gemäß Verordnung 1061/2010 die Standardprogramme „Baumwolle 60 °C“ bzw. „Baumwolle 40 °C“.
www.aeg.com Programm Programmbeschreibung Pumpen/Schleudern Schleudern der Wäsche und Abpumpen des in der Trommel verbliebenen Wassers. Alle Gewebearten, außer Wollwäsche und Feinwäsche. 1) Während dieses Programms dreht sich die Trommel langsam, um einen schonenden Waschgang zu gewährleisten. Die Trommel scheint sich nicht oder nicht ordnungsgemäß zu drehen, aber dies ist normal für dieses Programm. 2) Dieses Programm ist für den täglichen Gebrauch geeignet.
DEUTSCH Programm Standardtemperatur Temperaturbereich Referenzdrehzahl Schleuderdrehzahlbereich Maximale Beladung 1400 U/min 1400 U/min – 800 U/min Pumpen/Schleudern 1) 55 8 kg 1) Stellen Sie die Schleuderdrehzahl ein. Stellen Sie sicher, dass sie für die Art der zu waschenden Wäsche geeignet ist. Wenn Sie die Option Kein Schleudern auswählen, ist nur das Abpumpprogramm verfügbar. Baumwolle Eco Pflegeleicht Feinwäsche Wolle/Seide 20 Min.
www.aeg.com 8.2 Woolmark Apparel Care - Blau Das Waschprogramm Wolle dieser Maschine wurde von der Firma Woolmark auf das Waschen von Wolltextilien mit der Pflegekennzeichnung „Handwäsche“ getestet und zugelassen, vorausgesetzt, dass die Wäsche gemäß der Anleitung auf dem Kleidungsetikett und gemäß den Angaben des Maschinenherstellers gewaschen wird. Beachten Sie die Trocken- und Waschanleitung auf dem Kleidungsetikett. M1511 Das Woolmark Symbol ist in vielen Ländern ein Zertifizierungszeichen. 9.
DEUTSCH starten Sie das Programm ohne Wäsche. 57 So werden alle eventuellen Verunreinigungen aus Trommel und Bottich entfernt. 11. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 11.1 Einschalten des Geräts 1. Stecken Sie den Netzstecker in die Netzsteckdose. 2. Öffnen Sie den Wasserhahn. einige 3. Halten Sie die Taste Sekunden lang gedrückt, um das Gerät einzuschalten. Es ertönt eine kurze Melodie (falls eingeschaltet). Der Programmwahlschalter wird automatisch auf Baumwolle gesetzt.
www.aeg.com Entfernen Sie nach dem Waschgang bei Bedarf Waschmittelreste aus der Waschmittelschublade. 11.4 Überprüfen Sie die Position der Klappe 1. Ziehen Sie die Waschmittelschublade bis zum Anschlag heraus. 2. Drücken Sie den Hebel nach unten und ziehen Sie die Schublade heraus. 1 2 3. Drehen Sie die Klappe nach oben, wenn Sie Waschpulver verwenden. Klappe in der UNTEREN Position: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz.
DEUTSCH gewünschte Waschprogramm. Die entsprechende Programmanzeige leuchtet auf. Die Kontrolllampe der Taste Start/Pause blinkt. Das Display zeigt die voraussichtliche Programmdauer an. 2. Berühren Sie die entsprechenden Tasten, um die Temperatur und/oder Schleuderdrehzahl zu ändern. 3. Schalten Sie bei Bedarf eine oder mehrere Optionen durch Berühren der entsprechenden Tasten ein. Die zugehörigen Anzeigen leuchten im Display und die angezeigten Informationen ändern sich entsprechend.
www.aeg.com 11.9 Unterbrechen eines Programms und Ändern der Optionen Wenn das Programm bereits gestartet wurde, können Sie nur einige der Optionen ändern: 1. Berühren Sie die Taste Start/Pause . Die zugehörige Anzeige blinkt. 2. Ändern Sie die Optionen. Die im Display angezeigten Informationen ändern sich entsprechend. 3. Berühren Sie die Taste Start/Pause erneut. Das Waschprogramm wird fortgesetzt. 11.10 Abbrechen eines laufenden Programms 1.
DEUTSCH 61 5. Schließen Sie den Wasserhahn. 11.14 Standby-Option 11.13 Ablassen des Wassers nach Programmende Die Funktion Standby schaltet das Gerät in den folgenden Fällen automatisch aus, um den Energieverbrauch zu verringern: Wenn Sie ein Programm oder eine Option gewählt haben, nach dem/der die Textilien im Wasser liegen bleiben, ist das Programm beendet, aber: • Wenn Sie nicht innerhalb von 5 Minuten die Taste Start/Pause berühren.
www.aeg.com • Waschen Sie keine ungesäumten Wäschestücke und Wäschestücke mit Schnitten im Stoff in der Maschine. • Waschen Sie kleine und/oder empfindliche Wäschestücke (z. B. Bügel-BHs, Gürtel, Strumpfhosen usw.) in einem Wäschenetz. • Eine sehr geringe Beladung kann in der Schleuderphase zu einer Unwucht und übermäßigen Vibrationen führen. Vorgehensweise: a. Unterbrechen Sie das Programm und öffnen Sie die Tür (siehe Abschnitt „Täglicher Gebrauch“). b.
DEUTSCH Wenden Sie sich an Ihr örtliches Wasserversorgungsunternehmen, um die Wasserhärte in Ihrem Gebiet zu erfahren. 63 Anweisungen auf der Verpackung des Produkts. Verwenden Sie die richtige Menge Wasserenthärter. Halten Sie sich an die 13. REINIGUNG UND PFLEGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 13.1 Reinigen der Außenseiten Reinigen Sie das Gerät nur mit warmem Wasser und etwas milder Seife. Reiben Sie alle Oberflächen sorgfältig trocken.
www.aeg.com Halten Sie sich immer an die Anweisungen auf der Verpackung des Produkts. 2. Wählen Sie ein kurzes Programm für Baumwollwäsche mit hoher Temperatur oder schalten Sie das Programm Machine Clean, falls verfügbar, ein. Geben Sie eine kleine Menge Waschpulver in die leere Trommel, um Rückstände auszuspülen. 13.
DEUTSCH 13.7 Reinigen der Ablaufpumpe 65 Siebs einen Lappen bereit, um austretendes Wasser aufzuwischen. WARNUNG! Ziehen Sie den Netzstecker aus der Netzsteckdose. Kontrollieren Sie regelmäßig das Ablaufpumpensieb und sorgen Sie dafür, dass es sauber ist. Reinigen Sie die Ablaufpumpe in folgenden Fällen: • Das Gerät pumpt das Wasser nicht ab. • Die Trommel dreht sich nicht. • Das Gerät macht ein ungewöhnliches Geräusch, weil die Ablaufpumpe blockiert ist. 4.
www.aeg.com 8. Entfernen Sie gegebenenfalls Flusen und Fremdkörper aus der Siebaufnahme. 9. Prüfen Sie, ob sich das Flügelrad der Pumpe drehen lässt. Ist dies nicht möglich, wenden Sie sich an den autorisierten Kundendienst. 2 1 13.8 Reinigen des Siebs des Zulaufschlauchs und Ventils 10. Reinigen Sie das Sieb unter fließendem Wasser. Es wird empfohlen, das Sieb des Zulaufschlauchs und das des Ventils gelegentlich zu reinigen, um Ablagerungen zu entfernen, die sich mit der Zeit ansammeln. 1.
DEUTSCH 67 „Reinigen der Ablaufpumpe“ beschriebenen Vorgang aus. Reinigen Sie bei Bedarf die Pumpe. 13.10 Frostschutzmaßnahmen Falls das Gerät in einem Bereich installiert ist, in dem die Temperatur um 0 °C erreichen oder unter 0 °C sinken kann, entfernen Sie das im Zulaufschlauch und in der Ablaufpumpe verbliebene Wasser. 4. Wenn Sie den Schlauch wieder an der Geräterückseite anbringen, drehen Sie ihn je nach Position des Wasserhahns nach rechts oder links (nicht in die vertikale Position). 1.
www.aeg.com Ist das Gerät überladen, nehmen Sie einige Wäschestücke aus der Trommel und/oder drücken Sie die Tür zu und berühren Sie gleichzeitig die Taste Start/Pause, bis die • - Die Stromzufuhr ist nicht konstant. Warten Sie, bis die Netzspannung wieder konstant ist. • - Keine Kommunikation zwischen den elektronischen Bauteilen des Geräts. Schalten Sie das Gerät aus und wieder ein. Das Programm wurde nicht ordnungsgemäß beendet oder der Betrieb zu früh unterbrochen.
DEUTSCH Problem 69 Mögliche Abhilfe Das Wasser, das in das • Vergewissern Sie sich, dass sich der Ablaufschlauch in der Gerät einläuft, wird sofort richtigen Höhe befindet. Der Schlauch ist möglicherweise abgepumpt. zu niedrig angebracht. Siehe hierzu „Montageanleitung“. Das Gerät pumpt das Wasser nicht ab. • Stellen Sie sicher, dass der Siphon nicht verstopft ist. • Vergewissern Sie sich, dass der Ablaufschlauch nicht geknickt oder zu stark gekrümmt ist.
www.aeg.com Problem Mögliche Abhilfe Das Gerät verursacht ein ungewöhnliches Geräusch und vibriert. • Stellen Sie sicher, dass das Gerät richtig ausgerichtet ist. Siehe hierzu „Montageanleitung“. • Überzeugen Sie sich, dass das Verpackungsmaterial und/ oder die Transportsicherungen entfernt wurden. Siehe hierzu „Montageanleitung“. • Füllen Sie mehr Wäsche ein. Die Beladung ist möglicherweise zu gering. Die Programmdauer erhöht oder verringert sich während der Ausführung des Programms.
DEUTSCH Während des Waschprogramms können durch die ProSense-Technologie die Programmdauer und die Verbrauchswerte variieren. Siehe „ProSense-Beladungserkennung“ im Kapitel „Täglicher Gebrauch“.
www.aeg.com Die Schutzverkleidung gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt.
DEUTSCH 73 17.2 Reinigen des Ablaufpumpensiebs 1 2 3 180˚ 1 2 Reinigen Sie das Sieb regelmäßig und insbesondere, wenn der Fehlercode im Display angezeigt wird. 17.3 Programme Programme Füllmenge Produktbeschreibung 8 kg Weiße und bunte Baumwollwäsche. 8 kg Weiße und bunte Baumwollwäsche. Standardprogramme für die auf dem Energielabel angegebenen Verbrauchswerte. Pflegeleicht 3 kg Pflegeleichte Wäschestücke oder Mischgewebe. Feinwäsche 3 kg Feinwäsche, wie z. B.
www.aeg.com 18. PRODUKTDATENBLATT GEMÄSS EUVERORDNUNG 1369/2017 Produktdatenblatt Warenzeichen Modellkennung Nennkapazität in kg Energieeffizienzklasse AEG LP1481F, PNC914913453 8 A+++ -20% Energieverbrauch von in kW/Jahr auf der Grundlage von 220 Standard-Waschzyklen für 60 °C- und 40 °C-Baumwollprogramme bei vollständiger Befüllung und Teilbefüllung sowie dem Verbrauch der Betriebsarten mit geringer Leistungsaufnahme. Der tatsächliche Energieverbrauch hängt von der Art der Nutzung des Geräts ab.
DEUTSCH Programmdauer des Standardprogramms „Baumwolle 60 °C“ bei Teilbefüllung in Minuten 228 Programmdauer des Standardprogramms „Baumwolle 40 °C“ bei Teilbefüllung in Minuten 226 Dauer des unausgeschalteten Zustands in Minuten 5 Luftschallemission in db (A) Waschen 50 Luftschallemission in db (A) Schleudern 74 Einbaugerät J/N 75 Nein Die in der Tabelle oben enthaltenen Informationen erfüllen die Verordnung (EU) 1015/2010 der Kommission zur Durchführung der Richtlinie EG/2009/125. 19.
www.aeg.com 20. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
DEUTSCH 77
www.aeg.
DEUTSCH 79
192946722-A-492018 www.aeg.