User manual

Drying
55
Start time pre-selection
With the start time pre-selection you can program the start delay of
the drying program in the range from 1 to 19 hours.
0 Setting the program.
0 Hold the ] DELAY TIMER button depressed
until the desired number of hours of delay of the program
start appears in the display field for
[ PROG. TIME.
0 Press the X/i START/PAUSE button.
After elapse of the set number of hours the dryer
automatically starts the set drying program. The
[ PROG. TIME display field shows the number of
hours after which the drying program will start.
You can correct the pre-selected start delay time
at any time.
Start the drying program
0 Press the button X/i START/PAUSE.
The drying program starts.
You can see the progress of the drying process
by looking at the drying degree and program
run displays.