User manual

Description of the appliance

Control panel

A Program selector: for setting the drying program

B Drying degree indicator: Shows the achieved extent of drying; this

enables you to take-out individual pieces of laundry at the right time

during the drying process.

C Buttons and display block

– AUDIBLE SIGNAL (ZOEMER) button: When switched-on, an audible

signal is sounded at the end of the drying program; then take-out the

laundry

– SPECIAL CARE (LAGE TEMP.) button: For sensitive fabrics. This button

has no effect if the QUICK DRY (KORT) button has already been pressed.

– QUICK DRY (KORT) button: for quicker drying. Cannot be used with

COTTONS DAMP (KATOEN STRIJK-DROOG

), HAND IRON (STRIJK-

DROOG

) and MACHINE IRON (MANGELDROOG) programs or with

the DELICATES DAMP (MENGWEEFSELS STRIJKDROOG

) program. If

the SPECIAL CARE (LAGE TEMP.) button has already been pressed,

pressing the QUICK DRY (KORT) button has no effect.

– START/PAUSE (START/PAUZE) button: To start or interrupt a program.

– DELAY TIMER (STARTTIJDKEUZE) button: For pre-setting the start time in

the range from 1 to 19 hours; indication in the PROG. TIME display field

– Multi-display/Display PROG. TIME (LOOPTIJD): Indicates the probable

program duration or the time remaining of the currently set drying

program;

with postponed start time (DELAY TIMER (LOOPTIJD) button) indica-

tion of the number of hours left until the drying program starts; an

error code is displayed in the case of a disturbance (C and a number).

D Program run display: The currently running phase of the drying process

is indicated.