User manual

20
When pressing a but-
ton, the corresponding
button flashes several
times.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Turn the programme knob to
OFF (UIT). Set the programme
again.
Programme inactive,
EMPTY WATER (RESER-
VOIR) display illumi-
nated.
Condensate tank is full.
Empty condensate tank, then
start programme with START/
PAUSE (START/PAUZE) button.
Drying cycle ends
shortly after pro-
gramme starts. END
(EINDE) display illumi-
nated.
Not enough washing load-
ed or washing loaded is too
dry for selected programme.
Select time programme or
higher drying level (e.g. INTEN-
SIVE DRY - INTENSIEF-DROOG
instead of STORAGE DRY -
KAST-DROOG).
Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle com-
plete“).
Lint filter clogged. Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
SPECIAL CARE (LAGE TEMP.)
button pressed and load
volume too big.
SPECIAL CARE (LAGE TEMP.) is
only suitable for use with
loads of up to 2,5kg!
Load volume too big. Reduce load volume.
Laundry insufficiently pre-
drained.
Laundry must be adequately
pre-drained.
Problem Possible cause Remedy