User manual

Starting the programme

Press the START/PAUSE (START/PAUZE) button. The programme is start-

ed.

The programme progress display show drying progress.

Changing programme

To change a programme which has been selected by mistake once the

programme has started, first turn the programme selector to OFF (UIT)

and then reset the programme.

3 The programme can no longer be changed directly once the programme

has started. If nevertheless there is an attempt to change the pro-

gramme on the programme knob, the programme progress display and

the maintenance indicators flash. If an option button (excluding the

AUDIBLE SIGNAL (ZOEMER) button) is pressed, the corresponding indi-

cator flashes several times. The drying programme is not however af-

fected by this (laundry protection).

Putting in extra items or taking items out before end of

programme

1. Open loading door

1 Warning! Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the START/PAUSE (START/PAUZE) button to continue the drying

cycle.