User manual

Control panel

A Programme selector: To select the drying programme

B Drying degree indicator: Shows the achieved extent of drying; this

enables you to take out individual pieces of laundry at the right time

during the drying process.

C Buttons and display block

– AUDIBLE SIGNAL button: When switched on, an audible signal is

sounded at the end of the drying programme; then take out the

laundry

– SPECIAL CARE button: For sensitive fabrics.

– DOOR button: For opening the door when the appliance is switched

on.

– START/PAUSE button: To start or interrupt the programme.

– DELAY TIMER button: For pre-setting the start time in the range from

1 to 19 hours; indication in the PROGR. TIME display field

– Multi-display/PROGR. TIME display: Indicates the probable

programme duration or the time left of the currently set drying

programme; with postponed start time (DELAY TIMER button)

indication of the number of hours left until the drying programme

starts; an error code is displayed in the case of a disturbance (C and a

number).

D Programme run display: In each case the display for the current phase

of the drying process is lit.

E Instructions for the user:

– HEAT EXCHANGER: Clean the heat exchanger!

– EMPTY WATER: Empty the condensate container!

– CLEAN FILTER display: Clean the fluff filter!

Note: The indicators are extinguished only after the programme is

switched off.