User manual

Emptying the condensate tank

Empty condensate tank after every drying cycle.

If the condensate tank is full, an active programme will break off auto-

matically and the EMPTY WATER (BEHÄLTER) display will light up. In or-

der to continue the programme, the condensate tank must first be

emptied.

1 Warning! The condensate is not suitable for drinking or for preparing

foodstuffs.

1. Pull drawer containing condensate

tank out all the way (1). Pull out

condensate tank’s outlet connec-

tions (2).

2. Pour condensate out into basin or

other suitable container.

3. Slide outlet connections in and re-

fit condensate tank.

If the programme has been inter-

rupted as a result of the conden-

sate tank being full:

Press the START/PAUSE button to

continue the drying cycle.

3 The condensate tank has a volume of approx. 4 litres. This is sufficient

for around 6kg of laundry which has previously been spun at 800 revo-

lutions/minute.

3 The condensate can be used as distilled water, e.g. for steam ironing.

However first filter the condensate (e.g. with a coffee filter) to remove

any residue and small pieces of fluff.

Cleaning heat exchanger

If the HEAT EXCHANGER (WÄRMETAUSCHER) display is illuminated, the

heat exchanger needs to be cleaned.

1 Caution! Operating when the heat exchanger is clogged with lint can

damage the dryer. This also increases energy consumption.

1. Open loading door