Operation Manual

ENGLISH
54
Using the DVD-menu
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specic for the DVD and can thus not be
explained in detail.
Press the AUTO TUNE/MENU -button (Fig. 3/29) to access the DVD-menu.
Use the Cursor Buttons (Fig. 3/27) to navigate in the Menu. Press the
PLAY/ENTER -button (Fig. 3/8) to conrm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 3/3) on the
remote control.
Using fast forward or reverse
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the
or -button (Fig. 3/24), to start fast forward or fast
reverse. The current replay direction and the speed, e.g.
“ 2x“ is now displayed on screen.
2. Press the
or. -button several times in order to change the speed.
The speed can be accelerated by factor 2, 4, 8, 16 or 32.
3. Press the “PLAY/ENTER“ -button (Fig. 3/8) to restart the “normal”
replay when the desired section is reached.
Enlarging a screen section
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM -button (Fig. 3/17) to change the screen section.
For DVDs: Press the button several times to select the suitable zoom fac-
tor or to return to the original zoom factor.
For JPEGs: Press the
/ buttons (Fig. 3/24) repeatedly in order to select
the desired zoom factor.
NOTE:
Use the Navigation buttons (Fig. 3/27) to navigate in the picture you
have zoomed into.
Changing the viewing angle
Some DVDs oer the possibility to select the viewing angle.
Press the ANGLE -button (Fig. 3/7) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the message “
“ will be
displayed.
Repeat pressing the button to choose a dierent viewing angle, or to
return to the original viewing angle.
Adjusting the volume
Press the VOL + button (Fig. 3/16) to increase the volume.
Press the VOL - button (Fig. 3/16) to reduce the volume.
NOTE:
Please remember, that this will only change the output volume of the
DVD-Player. In order to adjust the volume to your requirements you may
also have to change the volume of the playback device.