Milano 40 USER MANUAL and Safety Precautions Corded Telephone with Caller ID 11/05hj V3
TABLE OF CONTENTS Description of the Appliance .........................................................4 Menu structure .............................................................................................4 Appliance overview ......................................................................................5 Backside view of the base............................................................................6 Display and symbols ..................................................................
External comfort functions.......................................................... 19 Waiting call and toggling............................................................................ 19 Consultation and toggling .......................................................................... 19 Conference call with three people ............................................................. 19 Turning off the microphone (Mute) ............................................................
Description of the Appliance Menu structure MENU Key Lock Key PIN-_ Key Lock-Off/On Audio Ring Tone Ring Tone-1-5 Ring Loudness Loudness-1-4/Off Key Tone Key Tone-Off/On Key PIN Key PIN-_ New PIN-_ Prefix Number Key PIN-_ Prefix_ Prefix Prefix-On/Off Dial Pref* Key PIN-_ Flash Time Flash-80 / 100 / 270 ms Dialing mode Dialing Tone/Pulse Contrast Contrast 1-5 Language Deutsch / English / Français / Italiano / Nederlands / Portugues / Turkce / Magyar / Ukrainia / Bulgaria / Czech /
Appliance overview B A 20 9 10 11 12 13 14 1 21 2 3 4 5 6 D 7 C 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 17 16 15 18 19 8 LED indicating communication. Shortcut dialing memories M1 – M3. "R" - key. "Mute" – key (microphone off). Repeat key / Pause. Volume ringer / handset / hands-free +. Volume ringer / handset / hands-free –. Hands-free key. Scroll down key – back in the menu. Phonebook. MENU - key / "OK" key. Scroll up key – forward in the menu.
A. B. C. D. E. F.
Contents of the packing • 1 base • 1 handset • 1 cable for the handset • 1 telephone line cord • 1 power supply adapter • 1 manual Specific features • Display with 1 Alphanumeric DOT-matrix-line for the name and two lines with 7-segment display for number and symbols • Hands-free • Caller ID (CLIP) with a maximum of 30 telephone numbers in the log • Phonebook with a maximum of 50 different telephone numbers • Re-dialing the last 5 numbers dialed • Display of the call duration • Volume of the ringer selectab
Installation of the appliance 1. Plug in the small connector of the power supply (coming from the adapter) at the backside of the base in power inlet (F). Plug in the adapter in the wall outlet (230V~). 2. Use the telephone line cord to realize the connection between the telephone inlet and the connection (E) at the back of the base. 3. Connect the handset cable to the inlet (D) of the base (A) and with plug (C) to the handset (B). This manual is meant for your information.
Congratulations Thanks for purchasing this telephone! In order to be able using your phone in full comfort, we advise to read this manual completely, so you will be familiar with its possibilities. Safety precautions Do not place the set in the proximity of heat sources and don't expose is to direct sunrays, dust or vibrations. Do not place the base station in a moist room, such as bathroom or shower. The ideal temperature range is between +5° and +35° C and the humidity between 25 % and 85 %.
Configuration For changing the settings, you open the menu by pressing the "MENU" - key. One can navigate inside the menus with the scrolling keys d and c. Confirming and saving a choice is done by pressing the "OK" - key. Leaving menus or submenus is done with the "ESC" -key (14). Choice of the ringer melody MENU Press the key MENU. The display shows Key Lock. d Press the key d, on the screen appears Audio. OK Press OK, on the screen appears Ring Tone.
OK @ Confirm your choice with OK. You hear a confirmation tone and your setting is saved. Press ESC twice to leave the menu. Activating or deactivating the keypad lock MENU Press the key MENU. The display shows Key Lock. OK Press OK, on the screen appears Key PIN-****. n Input the PIN code on the keypad (default 0000, set at the factory). OK Confirm your choice with OK, on the screen appears Key Lock-Off. cd Select ON or OFF with the scroll keys. OK Confirm your choice with OK.
n OK @ Use the keypad to input the prefix number. Confirm your choice with OK. You hear a confirmation tone and your setting is saved. Press ESC twice to leave the menu. The length of the prefix number is limited to 6 digits! Activating the prefix number Only if you activate the prefix number (described above), this number will be dialed before every telephone number you call. MENU Press the key MENU. The display shows Key Lock. d Press the key d several times, until PABX Setting appears.
Setting the Flash time The flash key "R" can be set with three different flash-times (80 / 100 / 270 ms). The flash-time to be used depends on the installation, on which your unit is connected • connected to the public telephone network with comfort functions; • connected to a PABX with similar functions. The comfort functions: waiting call toggling consultation second call conference call with three must be ordered and paid for with your local telephone network operator.
d Press the key d several times, until PABX Setting appears. OK Press OK, on the screen appears Key PIN. d Press the key d several times, until Dialing mode appears. OK Press OK, on the screen appears Dialing-Tone. cd Select your dialing mode between Dialing-Tone and Dialing-Pulse. OK Confirm your choice and save it by pressing OK. @ Press ESC twice to leave the menu. Setting the date and the time MENU Press the key MENU. The display shows Key Lock.
Setting the language There is a choice of fourteen languages available for the screen menus. To set a language please proceed as follows: MENU Press the key MENU. The display shows Key Lock. d Press the key d several times, until Setting appears on the display. OK Press OK, on the screen appears Contrast. d Press the key d several times, until Language appears on the display. OK Press OK, on the screen appears the actually set language. cd Select your language with the scroll keys.
USING THE TELEPHONE Be aware that, in the case of a power failure or in case of a defect of the telephone's power supply, the basic functions (making and receiving calls) remain intact. Answering an incoming call A ring tone and the LED (1), flickering in the same rhythm as the ring tone signal the incoming calls. The screen displays the number of the caller (when the network provider delivers it) and the name of the caller (when the delivered number is stored in the phonebook).
Calling Outside External calls are calls to the public telephone network. 1. Pick up the handset or press the hands-free key. You hear the dialing tone. 2. Input the desired number on the keypad (18). 3. The input number appears on the display and is dialed automatically. 4. To end the conversation, you hang up or press the hands-free key again. Dialing preparation 1. This stands for inputting the desired telephone number in standby, before picking up the handset.
Dialing a number from the phonebook Also read the chapter "PHONEBOOK". 1. Press the key phonebook B. . 2. On the screen appears Review, press OK. The first number (in alphabetical order) of the phonebook appears on the display. 3. 4. 5. 6. Press the scroll keys cd to scroll through the phonebook. You can also input the first letter of the name you are looking for; the list will then start from the first name with this initial letter.
External comfort functions The comfort functions: waiting call, toggling, consultation, second call, conference call with three must be ordered and paid for with your local telephone network provider. Your provider will also be able to tell you which flash-time has to be used on his installation (please also read the chapter on "Flash time" (page 13). When the unit is connected to a personal branch exchange (PBX), its supplier, or the delivered instruction manual will be able to inform you.
When you want to set up a conference call, press the "R" – key again. The active conversation is parked and you hear an extra dialing tone. Now press "3". The conference with 3 people is now activated. When one of the conversation partners hangs up, the communication with the other partner can continue. When you hang up yourself, the conference call is ended. Turning off the microphone (Mute) The microphone can be turned off temporarily.
PHONEBOOK Generalities Your set allows you to store 50 telephone numbers in a phonebook. Each entry can consist of 24 digits for the telephone number and 16 letters for the name. These records are sorted alphabetically. You can scroll through the phonebook entries, add new ones and edit or delete existing ones. For certain functions, alphanumeric input is necessary. In that case, the keypad automatically switches to alphanumeric mode.
5 (lower case) j k l 5 € 6 (lower case) m n o 6 ñ ö ò ó ô 7 (lower case) q q r s 7 ß 8 (lower case) t u v 8 ù ú û ü 9 (lower case) w x y z 9 Add a new phonebook entry Save all telephone numbers with the zero and the zone prefix, in order to have the name appearing on the screen when a call from that number comes in, and to have this name also stored in the CID list. 1. Press the key phonebook B. 2. Press the key d, New appears. 3. Press the key OK, a blinking cursor appears on the screen _.
Editing phonebook records 1. Press the key phonebook B. 2. Press the key OK. The first number (in alphabetical order) of the phonebook appears on the display. 3. Press the key OK, the first digit of the telephone number starts blinking. Use the scroll keys, c resp. d to move the cursor to the right resp. to the left. 4. The blinking sign can be overwritten by a new input or deleted with the X key. When you're finished inputting the change, press OK. 5. The first digit of the name starts blinking.
CID LIST (caller list - CLIP) Generalities Your set shows the number of the incoming call, as well as the day and the hour of the call, if the telephone network provider has activated this feature and if the caller did not hide his number (with the CLIR – function).
Dialing from the CID-list 1. Press the key CID list y (17). 2. The first number in the CID list appears on the display, with number, name (if saved in the phonebook), time and date of the call. 3. Press the scroll keys cd to scroll through the list for searching the wanted telephone number. 4. When you have found the wanted telephone number, you press the talk key i (13) or pick up the handset. 5. The displayed telephone number is dialed automatically. 6. Just hang up to end the conversation.
6. When you have made your choice, then press OK. 7. The first digit starts blinking. If you want to edit the number, you can do so as described in chapter "Editing phonebook records". If you do not want to edit the number, press OK 8. Then, a blinking cursor appears for entering the name. Use the keypad as described higher to enter the name. 9. Press OK when you are happy with the modifications made. On the screen appears Saved. Deleting numbers from the CID list individually 1.
APPENDICES Technical data System analog, corded telephone Power supply power adapter 230VAC / 50Hz / 35mA; exit voltage 6V DC / 300mA / 1,8 VA Memory Flash memory Room temperature +5° C à + 35° C; Relative air humidity 25% à 85% Temperature during storage -10° C à + 50° C Dialing system tone or pulse Function flash-key flash-time 80, 100, 270ms Dimensions: 195 x 195 x 70 mm Cable lengths: power supply cable: telephone line cord: Weight approx. 3,0 m approx. 3,0 m ca.
Troubleshooting No dialing tone • Check if the telephone line cord is well connected to the base and to the wall outlet. • Use only the delivered cable. • Adjust the volume of the handset to a higher level. Dialing a number impossible • Check if the dialing mode set, corresponds with the dialing mode of the telephone network. Set the correct mode. • The dialed telephone number is blocked. • The keypad is locked. • You have forgotten your PIN. • Reset the settings of the handset back to the defaults.
INDEX A K Audio · 10 Key PIN · 11; 12; 13; 14 Key Tone · 10 keypad · 5; 8; 11; 12; 14; 17; 21; 22; 25; 26; 28 B beep · 10 L C CID list · 5; 18; 22; 24; 25; 26 conference call · 13; 19; 20 consultation · 13; 19 Contrast · 7; 14; 15 Language · 15 lower case · 21; 22 M mute · 6 D date · 6; 14; 18; 24; 25; 26; 31 Date/Time · 14 default · 10; 11; 15 Delete ALL · 23; 26 Dialing-Pulse · 14 Dialing-Tone · 14 E external · 12; 15; 19 F flash · 13; 19; 27 Flash Time · 13 N New · 11; 20; 22 P PABX · 11; 12;
T R redial · 17 Replace No? · 25 Reset · 15; 28 Review · 18; 22; 23 Ring Loudness · 10 Ring Tone · 10 technical data · 27 time · 6; 7; 10; 12; 13; 14; 18; 19; 24; 25; 26; 27 toggling · 13; 19; 21 U upper case · 21 S Saved · 20; 22; 23; 25; 26 setting · 10; 11; 12; 13 Setting · 10; 13; 14; 15; 16 shortcut · 7; 15; 18; 20; 25 Speaker-5 · 16 Store to Book · 25 Store to M1 · 25 Sure? · 15; 23; 26 30 V volume · 7; 10; 16; 28 W Waiting · 19 AEG Milano 40 V.
Warranty Please check with your local dealer to know what kind of warranty this appliance carries, according to your country's laws and to the local practice. The warranty period starts from the first acquisition of the appliance. In order to prove the date of purchase, we advise you to keep the purchase receipt. A repair to an appliance that has been sent back, which is not accompanied by the purchase receipt, will always be charged. This will also be the case for badly packed appliances.
CE declaration of conformity Your set is adapted to be used in the country where you bought is. It has homologation for connection to the public telephone network, only for using it in private homes and shops. It can be connected to a normal outlet and be used by anyone. Each other use will be considered as inappropriate and not conform to the prescriptions. Any alteration or modification, not described in this manual, are not allowed.