User manual

AEG Milano 40 V.2_en 15
Setting the language
There is a choice of fourteen languages available for the screen menus. To set
a language please proceed as follows:
MENU Press the key MENU. The display shows Key Lock.
d Press the key d several times, until Setting appears on the display.
OK Press OK, on the screen appears Contrast.
d Press the key d several times, until Language appears on the display.
OK Press OK, on the screen appears the actually set language.
cd Select your language with the scroll keys.
OK Confirm your choice and save it by pressing OK.
@ Press ESC twice to leave the menu.
Returning the settings to the defaults
When you make a reset, all settings return to the default values, as they were at
delivery. This is necessary, when you have forgotten your PIN. Proceed as fol-
lows:
MENU Press the key MENU. The display shows Key Lock.
d Press the key d several times, until Setting appears on the display.
OK Press OK, on the screen appears Contrast.
d Press the key d several times, until Reset appears on the display.
OK Press OK, on the screen appears Sure?.
OK You must press OK to confirm. The telephone's settings are returned to
the default settings, originally set at the factory.
@ Press ESC twice to leave the menu.
Insert pause
When you use the telephone connected behind an older PABX, it is possible
that the access code for external calls must be followed by a pause, before the
telephone number may be dialed.
Unhook.
n Enter the access code for external calls.
/P Press the key /P, the pause is inserted.
n Enter the telephone number you wish to call.
This pause takes the place of one digit in the telephone number for repeating, in
the shortcut memories and in the phonebook.