User manual

20 AEG Milano 40 V.2_en
When you want to set up a conference call, press the "R" – key again. The ac-
tive conversation is parked and you hear an extra dialing tone. Now press "3".
The conference with 3 people is now activated.
When one of the conversation partners hangs up, the communication with the
other partner can continue.
When you hang up yourself, the conference call is ended.
Turning off the microphone (Mute)
The microphone can be turned off temporarily. This allows you to talk to people
in your direct environment, without the telephone conversation partner over-
hearing it.
1. You are making a call.
2. Press the "Mute" key M (4) to turn off the microphone, it is inactivated and
the symbol M appears on the display.
3. Now, you can talk to the people around you. Your conversation partner at
the other side of the line can't hear what is said.
4. To continue the call, Press the "Mute" key M (4) again, to switch on the mi-
crophone. You can continue your conversation.
Saving numbers in the shortcut memories
Three telephone numbers with the corresponding name can be saved in the
shortcut memories. Proceed as follows:
1. Press the key M1, M2 of M3. On the screen appears New.
2. Press the key OK.
3. Enter the number that you want to save. When your appliance is connected
behind a PABX, that does not open the outside line automatically, the
number in the shortcut memory must be preceded by the access code for
outside lines and, if necessary, a pause.
4. Press OK again.
5. Enter the name, corresponding to the number entered.
6. Press OK again, on the screen appears Saved and a confirmation signal
sounds.
Reading the call duration
About 8 seconds after you have pressed the hands-free key or picked up the
handset, the duration in minutes and seconds 00:00 appears on the display;
e.g.: 01:20 = 1min, 20 sec. At the end of the conversation, this duration remains
on the screen during approximately 5 seconds.