User manual

22 AEG Milano 40 V.2_en
5 (lower case) j k l 5 €
6 (lower case) m n o 6 ñ ö ò ó ô
7 (lower case) q q r s 7 ß
8 (lower case) t u v 8 ù ú û ü
9 (lower case) w x y z 9
Add a new phonebook entry
Save all telephone numbers with the zero and the zone prefix, in order to have
the name appearing on the screen when a call from that number comes in, and
to have this name also stored in the CID list.
1. Press the key phonebook B. (10). On the screen appears Review.
2. Press the key d, New appears.
3. Press the key OK, a blinking cursor appears on the screen _.
4. Us e the keypad n to enter the telephone number.
5. Press the key OK and, with the keypad n, enter the corresponding name.
6. Press the key OK, on the screen appears Saved and again New. You can
continue keying in the next telephone number and name or leave the
phonebook with the ESC - key.
Attention!
When your appliance is connected behind a PABX, that does not open the out-
side line automatically, the number must be preceded by the access code for
outside lines and, if necessary, a pause.
Example (access code = 0): 0 – pause – prefix – telephone number
Searching in the phonebook
1. Press the key phonebook B. (10). On the screen appears Review.
2. Press OK. The first number (in alphabetical order) of the phonebook ap-
pears on the display.
3. Press the scroll keys
cd to scroll through the phonebook
or
1. Press the key phonebook B. (10). On the screen appears Review.
2. Press the key OK. The first number (in alphabetical order) of the phone-
book appears on the display.
3. One can also input the first letter of the name you are looking for on the
keypad n; the list will then start from the first name with this initial letter.
4. Press the scroll keys
cd to scroll through the phonebook, starting from
the found record.