User manual

24 AEG Milano 40 V.2_en
CID LIST (caller list - CLIP)
Generalities
Your set shows the number of the incoming call, as well as the day and the hour
of the call, if the telephone network provider has activated this feature and if the
caller did not hide his number (with the CLIR – function).
The CLIP – function also offers the following possibilities:
• Identifying the caller before accepting a call;
• Registering the last 30 calls with the number of the caller in the CID list
• Consulting the CID list, finding the last calls entered with the date and time of
the call and the telephone number of the caller;
• Seeing the name of the caller, if the number is saved in the phonebook;
• Scrolling through the CID list;
• Dialing a number from the CID list;
• Saving a number from the CID list to the phonebook.
When the network operator also sends the date and time, the internal clock of
your set will be adjusted automatically when the first call enters. Many opera-
tors, however, only send the number. In order to have a correct registration of
the date and time that a call entered, you will have to adjust the clock as de-
scribed.
When your appliance is connected behind a PABX, that does not open the out-
side line automatically, the number in memory must be preceded by the access
code for outside lines and, if necessary, a pause.

For more information please check with your network operator.
Always add the prefix to the telephone number you save in the phone-
book, in order to see their name when they call you.
Opening the CID list
1. Press the key CID list y (17). The first number in the CID list appears on
the display, with number, name (if saved in the phonebook), time and date
of the call.
2. Use the scroll keys
cd to run through the list.

The telephone number stays on display until 5 seconds after the last
ring tone, then the set returns to stand-by. During a conversation, there
is no room for displaying the telephone number. When the CID – list is
full, the oldest call is erased.