User's Manual

English

• Keep the device away from vases, baths, wash basins etc. If liquid enters

the device this may cause serious damage.

Overview of the Components

1 Set minutes (MIN)

Hour function key (HR)

3 Function key for delayed switch-o (SLEEP)

4 Function key (SNOOZE)

5 Loudspeaker

6 Throw-out aerial (FM)

7 Mains lead

8 Alarm (AL) function button

9 Time setting function key (TIME)

10 Volume control (BUZZ. OFF

VOL)

11 Band selection switch (AM/FM)

12 Regulator (TUNING)

13 Frequency display, Station scale

14 Battery compartment

15 LED display

16 LED for activated alarm function (AUTO)

17 Function switch (ON/OFF/AUTO)

Putting into function

Insert the plug into a properly installed 230 V, 50 Hz power socket.

Radio station tuning

1. Turn the band selector switch (11) to the FM or AM position, depending on

which frequency band you wish to hear.

UKW = FM, Medium Wave = AM.

2. Move the function switch (17) to the ON position.

3. Turn the tuning control in order to tune in to a station. The station scale

shows the frequency that has been set.

4. If reception is too weak, change the position of the dipole antenna in order

to improve the reception.

5. An aerial is integrated into the device for the reception of AM stations. The

device can be aligned to the station by changing its position.

83649-05-MRC4111_AEG.indd 5083649-05-MRC4111_AEG.indd 50 24.02.2009 12:23:48 Uhr24.02.2009 12:23:48 Uhr