User's Manual

English
66
Manual
While the unit searches for a signal, the time can be set manually only while the unit is in
operation.
• HoldtheMODEbutton(8)depresseduntiltheyearindication(YR)onthedisplay
flashes.
• Nowyoucansettheyear(YR),themonth(M),theday(D),thetimedisplayformat
(12 H/24 H), the hours, and the minutes with the buttons (9) and (10).
• Ineachcase,conrmtheinputwiththeMODEbutton.Thecurrentindicationtobeset
flashes on the display.
NOTE:
• Theinputisstoredautomaticallywithinapproximately30secondswhennobuttonis
pressed.
• Witha12hourdisplaythefollowingisdisplayed:PM=Afternoon
• Settingoftheweekdayisdoneautomatically.
Display Date and Year
While the unit searches for a signal, this function can only be used when the unit is in
operation.
• Pressthe button (10), to display the date for a short time.
• Pressthe button (9), to display the year for a short time.
Switching to Summer Time
While the unit searches for a signal, this function can only be used when the unit is in
operation.
• Keepthe button (9) depressed to switch between summer time and normal time.
When summer time has been selected, the symbol “DST ” is shown on the display.
Alarm function
NOTE: Important!
• Whiletheunitsearchesforasignal,thealarmtimecanonlybeactivatedordeacti-
vated if the unit is in operation.
• NoalarmbuzzercanbeheardifacableisconnectedtotheLINEINjack!