User's Manual

English
67
Setting of the Alarm
Youcansettwoalarmtimes.Proceedasfollows:
1. PresstheAL.SETbutton(11)forapproximately3seconds.Thedisplayshows
“ALARM 1 ” and the number of the actually set alarm time starts to flash.
2. Use the buttons (9) and (10) for setting.
3. Press the AL.SET button for confirmation. The minutes start to flash.
4. Use the buttons and for setting.
5. Now select the days you want the alarm to sound. The following selections can be
made:
• MondaytoFriday
• Monday–Saturday
• Monday–Sunday
6. Press the AL.SET button to set the second alarm time. Proceed as described above for
the setting.
NOTE:
• Ifyouwanttosetonlytherstalarmtime,presstheAL.SETbuttonuntilthetime
is displayed again.
• PresstheAL.SETbuttontodisplaythesetalarmtimesforashorttime.
Radio alarm
After you have set the alarm time and a radio station, press the AL.1 button or the
AL.2 button (back of the unit). Press the button until the symbol “ALARM 1 ” or
“ALARM 2 ” is shown.
NOTE:
As soon as the alarm time is reached, the radio is switched on. The selected radio station
plays at the set volume.
Buzzer alarm
If you do not want to be wakened with a radio station, press the AL.1 button or the
AL.2 button (back of the unit) until the symbol “ALARM 1 ” or “ALARM 2 ” is
shown on the display.
NOTE:
• Insteadoftheradio,thebuzzergoesoffwhenthealarmtimeisreached.
• Thevolumeofthesignaltonecannotbechanged.