User's Manual

English

Turning off the Alarm

Press the button (3) to stop the alarm.

Automatic Alarm Interval

Theautomaticallysetalarmfunctioncanbeshutoffforapproximately9minuteswiththe

SNOOZE/SLEEP button (2).

Deactivate the Alarm Function

To deactivate the alarm function, press the AL.1 button or the AL.2 button (back

of the unit) until no alarm symbol is shown on the display.

Delayed Shut-Off

Youcanusethefunctionfordelayedpower-offwithradiooperation.Theunitisswitched

off automatically when the selected time is reached.

• Selectthetimeafterwhichtheunitisswitchedoffbyrepeatedlypressingthe

SNOOZE/SLEEP button (2). The following selections can be made: SLEEP 90, 60, 30

and 15 minutes.

• Thisfunctioncanbecancelledwiththe button (3).

Projection

NOTE: Important!

• Whiletheunitsearchesforasignal,theprojectingdisplaycanonlyberotatedor

turned on/off if the unit is in operation.

• Thedisplaycanonlybeseeninadarkenedroom.

With this unit, you can project the time onto a wall or the ceiling.

• YoucanswitchthisfunctiononandoffwiththeON/OFF/PROJECTIONbutton(15).

• Rotatetheprojector(13)tothedesiredposition.

• Therearoftheprojectorhasasettingwheel(15),withwhichyoucanadjustthesharp-

ness of the projection.

• Youcanusethe180°FLIPbutton(15)toiptheprojectionby180degrees.