Operating Instructions and Installation Instructions

Installation - for contractors

9. Preparations

» Flush the water line thoroughly.

Water installation

A safety valve is not required.

Taps

» Use suitable taps (see chapter "Appliance descrip-

tion / Accessories").

Note

Fitting the special aerator supplied provides an op-

timum water jet.

10. Installation

10.1 Installation site

Install the appliance in a room free from the risk of frost

and near the draw-off tap.

Ensure that the lateral xing screws for the cover are

always accessible.

The appliance is only suitable for undersink installation

(water connections at the top).

DANGER Electrocution

Protection rating IP25 is only ensured if the appli-

ance back panel is tted.

» Always t the appliance back panel.

10.2 Installation options

Undersink installation, pressure-tested, with

pressure-tested tap

26_02_05_0041

Undersink installation, non-pressurised, with

non-pressurised tap

26_02_05_0086