Operating Instructions and Installation Instructions
36
Installation - for contractors
26_02_05_0085
» Route the power cable through the cable entry in the
back panel.
» Hook in the appliance cover with the heater at the
bottom.
» Click the heater into place using the snap fastener.
» Secure the appliance cover with the cover xing
screws.
» Install the tap. For this, also observe the tap operat-
ing and installation instructions.
!
»
Note
»
tee.
10.2.2
26_02_05_0033
» Install the tap. For this, also observe the tap operat-
ing and installation instructions.
!
»
-
» Fit the appliance to the tap with the water
connections.