Operating Instructions and Installation Instructions
37
Installation - for contractors
10.3 Connecting the power supply
DANGER Electrocution
DANGER Electrocution
DANGER Electrocution
MTE 350.
-
»
!
-
!
» Connect the power cable as shown in the wiring dia-
gram (see chapter "Specication / Wiring diagram").
11. Commissioning
11.1
26_02_05_0087
» Fill the appliance by running the tap several times
until the pipework and appliance are free of air.
» Carry out a tightness check.
» Insert the power cable plug, if present, into the
standard safety socket or set the fuse/MCB.
» Check the function of the appliance.
» In the case of oversink installation, afx the company
logo supplied over the existing company logo.
11.2
» Explain the appliance function to users and familiar-
ise them with its operation.
» Make users aware of potential dangers, especially
the risk of scalding.
» Hand over these instructions.