Operating Instructions and Installation Instructions
39
Installation - for contractors
Factory setting: 38 °C
30°C
38°C
50°C
D0000042035
» Using a screwdriver, set the potentiometer to the
maximum required temperature.
» Fit the appliance cover.
Factory setting: Maximum ow rate
26_02_05_0079_
» Using the adjusting screw, set the maximum required
ow rate:
◦ Lowest ow rate = wind the screw in as far as it will
go.
◦ Highest ow rate = wind the screw out as far as it will
go.
» Fit the appliance cover.