Installation manual

Illustration 3.11: AC Cable Wire Strip

Legend

1 Blue cable - Neutral

2 Yellow/green cable - Earth

The illustration shows the stripping of insulation of all 5 wires of the AC cable. The length of the

PE wire must be longer than the mains and neutral wires.

Illustration 3.12: AC Connection Area

1. Verify the inverter matches the grid-voltage

2. Release main circuit breaker and make precautions to prevent reconnection.

3. Open the front cover.

4. Insert the cable through the AC gland to the terminal blocks.

5. The three mains wires (L1, L2, L3) and the Neutral wire (N) are mandatory and must

be connected to the 4-pole terminal block with the respective markings.

3. Installation

8000038781_00_BAL_en / L00410564-01_02 15