Installation manual

- Layout type (inside wall, under ground, free air etc.)

- UV resistance

Illustration 5.4: Overview of Inverter with Torque Indications

Parameter

Screwdriver Tightening Torque

1 Front screws TX 30 6-8 Nm

2 Locking screw TX 30 5 Nm

3 Terminal blocks (small) Straight slot 0.5x3.0 mm 0.5 Nm

4 Terminal blocks (large) Straight slot 1.0x5.5 mm Min. 1.2 Nm

5 PE Straight slot 1.0x5.5 mm 2.2 Nm

6 M16 SW 19 mm 2-3 Nm

7 M25 SW 30 mm 2-3 Nm

Table 5.6: Nm Specifications

Protect PV 10 kW

Protect PV 12.5 kW Protect PV 15 kW

Maximum inverter current 15 A 19 A 22 A

Recommended fuse type gL/gG 16 A 20 A 25 A

Table 5.7: Mains Circuit Specifications

5. Technical Data

8000038781_00_BAL_en / L00410564-01_02 27