Operation Manual

Thread the upper threading
Thread the upper threading
Put the thread reel on the reel holder so
that the thread comes backwards from
the reel.
Hold onto the reel with your right hand
and lead the thread downwards through
the two tension plates from top to bot-
tom.
Lead the thread to the top through the
thread giver. Lead the thread giver with
a slight pull through the hole of the thre-
ad giver. Lead the thread to the needle
and thread the needle from front to
back.
Draw up lower threading
Draw up lower threading
Put the sewing foot on its highest posi-
tion. Now, turn the hand wheel with your
right hand into your direction until the
needle moves down and then it moves
up again.
Stop the hand wheel as soon as the
needle is on its highest position.
Hold on the end of the upper stitch with
your left hand.
Pull the upper stitch slightly to the top
so that the lower stitch forms a loop
(figure 2).
Now, pull out around 5 cm of both thre-
ads under the sewing foot to the back
(figure 3).
11
Bedienungsanl.1800/1600 GB 30.08.2004 17:45 Uhr Seite 13