Operation Manual

Stitch length selection dial
Stitch length selection dial
To change the stitch length you can
turn the selection dial so that the
number of the desired stitch length
is at the mark.
The numbers stand for the approximate
stitch length in mm.
The lower the number is the shorter the
stitch is.
Reverse stitch
Reverse stitch
Press the button down to use
the reverse stitch.
Stitch selection dial
Stitch selection dial
You can set the desired stitch
using the stitch selection dial.
8
Stich length
selection
button
Bedienungsanl.1800/1600 GB 30.08.2004 17:45 Uhr Seite 10