User manual

Prior to Initial StartÐUp

¥ Please clean the appliance interior and all accessories prior to ini-

tial start-up (see section: ÒCleaning and CareÓ).

Electrical Connection

Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

WARNING Ð THIS APPLIANCE MUST BE EARTHED

The manufacturer declines any liability should these safety

measures not be observed.

Before switching on, make sure the electricity supply voltage is the

same as that indicated on the appliance rating plate. The rating pla-

te is inside, on the left.

The appliance is supplied with a 13 amp plug fitted. In the event of

having to change the fuse in the plug supplied, a 13 amp ASTA

approved (BS 1362) fuse must be used.

Important!

The wires in the mains lead are coloured in accordance with the fol-

Inner door reversal

1. Using a screwdriver release

bracket (1) by pressing on the

internal spring and withdraw it

from its seat together with the

door; remove plug (2) and fit it

in the hole left open on the

opposite side; turn the door

through 180¡, remove the

bracket (1) and refit it on the

opposite side.

2. Refit the door and insert the

top pin and bottom bracket (1),

pushing it into place.

To ensure correct storage of food, the door is fitted with a simple

spring device which holds it in the open position until it is properly clo-

sed.

PR140

180°