User manual

Your appliance needs air

For safety reasons, minimum venti-

lationmust be as shown Fig.

Attention: keep ventilation ope-

nings clear of obstruction;

NP005

100 mm10 mm

10 mm

Rehingeing the door

The side at which the door opens can be changed from the right side

(factory adjustment) to the left side, if the installation site requires.

Warning! When changing the side at which the door opens, the

appliance may not be connected to the mains. Remove plug from the

mains beforehand.

Procced as follow:

1. Remove the clip-in ventilation grille

(D).

2. Remove the bottom hinge (E) by

unscrewing the two fixing screws.

3. Slide the bottom door off the centre

hinge (B).

4. Remove the centre hinge and slide

the top door off pin (5); unscrew pin

(5) and refit it on the opposite side.

5. Remove the two plugs, to reveal the

holes for the hinge pivots, and

remount them on the other side.

6. Refit the top door and the centre

hinge (H) on the opposite side.

7. Refit the bottom door.

8. Refit bottom hinge (E) on the oppo-

site side, using the two screws pre-

viously removed.

9. Remove blanking cover (F) from

ventilation grille (D) by pushing it in

the direction of the arrow and refit it

D590

PR185